Why should I pick steel for my new support beam?

• <div><p>You should pick steel for your new support beam for a few reasons. While steel is more expensive than other materials, such as laminated veneer lumber or glulam, it offers the following benefits:</p><ul><li><p>Fire-resistant</p></li><li><p>Unaffected by pests</p></li><li><p>Longer-lasting</p></li><li><p>Stronger against water damage (when galvanized against rust)</p></li></ul><p></p></div>

Does a structural engineer need to be licensed?

• <div><p>Yes, all states require structural engineers to carry the proper license, with specifics determined by each state. You can use Angi’s <a href="https://www.angi.com/angi-license-check.htm">state licensing tool</a> to confirm that the structural engineer you’re considering holds the required licensing to tackle your job. Hiring an unlicensed structural engineer will not only cause issues with permits but it could also lead to an unsafe building. The cost of a professional, licensed, and experienced engineer is well worth the investment.</p></div>

Get matched with top structural engineers in San Ildefonso Pueblo, NM

Q: How do you know if a wall is load-bearing?

• <div><p>The easiest way to <a href="https://www.angi.com/articles/load-bearing-wall.htm">tell if a wall is load bearing</a> is to check if it&rsquo;s an exterior wall or if it runs perpendicular to the joists above and below it (or parallel to beams). Exterior walls are almost always load-bearing, and walls that run under beams or parallel to them are also usually load-bearing. There are exceptions to these rules, and walls that don&rsquo;t fit into these categories can still be load-bearing. If you&rsquo;re unsure, hire a structural engineer to look at your home to assess whether or not the wall is structural.</p></div>

Q: Is a structural engineer the same as a foundation engineer?

• <div><p>Structural engineers specialize in all aspects of a building&rsquo;s structural integrity, including the foundation. Foundation engineering is a critical part of structural engineering, so structural engineers are experts in foundation design. Many foundation repair companies either have a structural engineer on staff or one they work closely with, so be sure you look for that when deciding <a href="https://www.angi.com/articles/who-do-i-hire-foundation-repair.htm">who to hire for foundation repair</a>.</p></div>

Q: Are brick houses safer in an earthquake?

• <div><p>According to the <a href="https://www.earthquakecountry.org/step4/urmwalls/#:~:text=Houses%20built%20of%20unreinforced%20masonry,and%20the%20roof%20is%20critical.">Earthquake Country Alliance</a>&mdash;a public and private alliance in California that works to improve earthquake and tsunami readiness&mdash;reports that unreinforced masonry, such as stone, bricks, and hollow clay tiles, is more susceptible to earthquake damage. The mortar between bricks isn&rsquo;t as stable as other building materials and methods.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your structural engineering project in San Ildefonso Pueblo, NM?

Select your specific project to find the pro for you.

Verified Reviews for Structural Engineering pros in San Ildefonso Pueblo, NM

*The Angi rating for Structural Engineering companies in San Ildefonso Pueblo, NM is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

*The HomeAdvisor rating for Structural Engineering companies in San Ildefonso Pueblo, NM is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

Last update on April 21, 2024

Reviewed in April 2024
PURCHASED FROM A TUFF SHED DEALER in ABQ, NM. So many exposed nails on inside from a ‘missed the stud scenario’. There is one area where the screw attaching the outside vertical component of the shed to the floor of the shed was not screwed in completely, an 1/4” space existed between the side...
Tuff Shed Inc - Albuquerque
Request a quote
Reviewed in March 2022
They installed 1500sf of glue down engineered wood in my home. Mike always showed up on time and was one of the few I could get to show up and give a quote (owner-supplied wood). The downfall is in the precision and details of the installation. In the second course of wood laid he left 3...
Legacy Hardwood Floors, LLC
Request a quote
Reviewed in February 2020
The whole DreamStyle of New Mexico team was excellent--thank you, Steve for the estimate and Ken for the measurement and consult! Installers Carlos Delgado and Saul F were professional, efficient, and did beautiful work. They made removing and replacing 10 windows seem almost easy! They also cut...
Dreamstyle Remodeling of New Mexico
Request a quote
Reviewed in February 2019
I have worked with Elmer Young for about 20 years. He rebuilt and remodeled our main house in Tesuque in several stages, and also worked to remodel a property in Denver. He completed many phases including structural rebuilding about 2/3 of our house, addition of bathrooms, new kitchen, new...
All Phase Construction Services, LLC
Request a quote
Reviewed in May 2018
Zachary Romero of Green Mountain Contractors provided me with more than just excellent service on replacing my tar and gravel roof - he also offered honest and valuable advice on what I should purchase. For instance, I initially wanted to buy a steel roof, and first talked to a competitor about...
Fix-All, LLC
Request a quote
Reviewed in October 2017
Called me to discuss my need for engineer Came out and gave me verbal report of probable needs
Durand Architectural Engineering, Inc.
Request a quote
Reviewed in September 2016
The above description sounds simple, but it was anything but simple. This was an intricate design for 2 cantilevered trellis's using mortise and tenon connections. It was a unique piece and Michael figured out the details of how to put it together so that it was both structurally sound and...
Blue Sky Home Improvement
Request a quote
Reviewed in November 2015
Very professional, installed, patched as needed, overcame somewhat challenging design and structural and electrical configuration of house. Technicians committed to doing it right; one stayed until 6:30 p.m. adjusting and insuring the system worked correctly. <br />
Reliable Tech Heating Cooling & Plumbing
Request a quote
Reviewed in May 2015
The most important strength of the provider is his integration of the planning, designing, and building functions so that there is a clear realization of the owner's desires and needs. Since the provider is involved from the design stage to the final completion he can assure that the owner's...
Earth Shelters
Request a quote
Reviewed in January 2012
They showed up when they said they would. They moved my grandmother's heavy furniture. They removed pictures and art from the wall and when everything was done, they put it all back without breaking or damaging anything. I cannot recommend these people enough. As an engineer, I'm very...
THE WOMEN HOUSEPAINTERS
Request a quote

Find Structural engineers in San Ildefonso Pueblo

J and K Engineering

New to Angi

Serving San Ildefonso Pueblo, NM and surrounding areas

In business since 2018

Free estimates

With several years experience, we work hard to bring each customer the best possible service and quality available. We look forward to working with you on your next project. We welcome your questions, and thank you for your interest.

Serving San Ildefonso Pueblo, NM and surrounding areas

In business since 1995

EEI has been in business for 6 years. With offices in Reno NV, Carlsbad CA, and Camarillo CA EEI provides Environmental, Engineering and Architectural services. If you need Engineering or Architectural services please send an e-mail to [email protected]. A complete company profile can be seen at www.eeitiger.com, or call us in Reno at (775) 746-1980 to discuss how we can assist you.

Request Quote

Structural Engineering questions, answered by experts

The easiest way to tell if a wall is load bearing is to check if it’s an exterior wall or if it runs perpendicular to the joists above and below it (or parallel to beams). Exterior walls are almost always load-bearing, and walls that run under beams or parallel to them are also usually load-bearing. There are exceptions to these rules, and walls that don’t fit into these categories can still be load-bearing. If you’re unsure, hire a structural engineer to look at your home to assess whether or not the wall is structural.

Structural engineers specialize in all aspects of a building’s structural integrity, including the foundation. Foundation engineering is a critical part of structural engineering, so structural engineers are experts in foundation design. Many foundation repair companies either have a structural engineer on staff or one they work closely with, so be sure you look for that when deciding who to hire for foundation repair.

You should pick steel for your new support beam for a few reasons. While steel is more expensive than other materials, such as laminated veneer lumber or glulam, it offers the following benefits:

Fire-resistant
Unaffected by pests
Longer-lasting
Stronger against water damage (when galvanized against rust)

According to the Earthquake Country Alliance—a public and private alliance in California that works to improve earthquake and tsunami readiness—reports that unreinforced masonry, such as stone, bricks, and hollow clay tiles, is more susceptible to earthquake damage. The mortar between bricks isn’t as stable as other building materials and methods.

Yes, all states require structural engineers to carry the proper license, with specifics determined by each state. You can use Angi’s state licensing tool to confirm that the structural engineer you’re considering holds the required licensing to tackle your job. Hiring an unlicensed structural engineer will not only cause issues with permits but it could also lead to an unsafe building. The cost of a professional, licensed, and experienced engineer is well worth the investment.

The San Ildefonso Pueblo, NM homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Alison Kasch
•
Apr 4, 2026Apr 4, 2026
How Much Does It Cost to Remove a Load-Bearing Wall? [2026 Data]
Do you have a load-bearing wall standing between you and your projects that you want to remove? Learn about the cost of removing a load-bearing wall.
Dan Simms
•
May 30, 2026May 30, 2026
How Much Does Steel I-Beam Installation Cost? [2026 Data]
A new steel I-beam is more durable than a wooden one. Learn what factors can affect steel I-beam installation costs and how to budget for this project.
Dan Simms
•
May 30, 2026May 30, 2026
How Much Does a Structural Engineer Cost to Hire? [2026 Data]
The cost of a structural engineer is easily justifiable given the value they bring to the table. Use this guide to see what hiring your professional will total.
Dan Simms
•
Apr 9, 2026Apr 9, 2026
Why You May Need to Hire a Structural Engineer for a Home Inspection
Learn why it might be a good idea to hire a structural engineer for a home inspection in addition to a general home inspector when you’re purchasing a home.
Rachel Hoffman
•
May 2, 2026May 2, 2026
Structural Steel Beam vs. Wood Beam: Which Is Right for You?
Structural steel and wood beams ensure your house is structurally sound. Learn the difference between steel and wood beams and how to choose the right one.
Em Norton
•
May 5, 2026May 5, 2026
How to Hire a Structural Engineer: Complete Guide
It can be hard to choose the right pro for any job, but it matters. Learn how to hire a structural engineer who'll get the job done right from start to finish.