You can seal a concrete slab by cleaning the surface, filling in any cracks, etching the surface, applying a sealer, and letting it dry. Concrete slabs don't typically need sealing, but you can use a topical concrete sealer if you notice signs of water damage. If you haven't already fixed the cause of the leak, then you'll want to repair the plumbing before you seal a concrete slab.

Mix the resurfacer into a sticky mixture. The consistency should look like mashed potatoes. Use a squeegee to push the resurfacer across the pitted area and smoothen the surface with a cement trowel flush. Make sure you protect any expansion joints with a weather strip. Alternatively, cut out any resurfacer that touched the joint once the mixture begins to harden.

How do I epoxy a garage floor?

To epoxy a garage floor, you need to measure the area of the floor, remove all items from the garage, thoroughly clean the floor, and then follow the manufacturer’s instructions to mix and apply the epoxy. Learning how to epoxy a garage floor can save you between $4 and $7 per square foot on labor.

To improve the appearance of concrete steps, you can repair any damage, refresh the surface, and add decorative elements. For crumbling, chipping, or broken sections, consider concrete resurfacing or light repair. If the surface is intact but discolored, applying a coat of paint, stain, or concrete sealer can refresh its look; reapplying a sealer every one to two years is recommended for maintenance. For a quick enhancement, you can also add decorative items like potted plants, garden statues, lanterns, or decorative railings to spruce up the area.