Get matched with top epoxy flooring pros in Clayton, NM

Yes, you can seal old or existing concrete, but proper preparation is crucial. The concrete surface must be clean, dry, and free of any incompatible old sealant. To check if an old sealer is present, drip a few drops of water onto the surface; if the water is absorbed in under five minutes, it's ready to be resealed. If you plan to use the same type of sealer that was previously applied, you may not need to remove the old layer. However, if you are using a different type of sealer, the old one must be completely removed. Before applying the new sealer, thoroughly clean the concrete and repair or fill any cracks to ensure a smooth, well-prepared surface.

You can paint concrete with paint rollers. In fact, using paint rollers is considered one of the easiest ways to evenly apply paint on concrete. A paint roller with a 1/2- to 3/4-inch-thick nap—which is basically a fabric paint roller cover—is best for painting concrete. The thicker the nap, the more paint it can hold to fill those pesky concrete cracks and crevices.

Sealing resurfaced concrete is not an absolute necessity. However, it is recommended, and in most cases, a high-quality concrete sealer can protect the surface from stains as well as water penetration, extending the life of the resurfacing material. Some sealers are formulated to protect pigments from fading due to UV exposure. Sealer tends to enhance the colors in decorative resurfacing applications, making them more vibrant and richer compared to the duller, more faded appearance of concrete colors without sealer.

The benefits of epoxy floor coating include increased durability for concrete surfaces in the face of harsh chemicals, easy cleaning and maintenance, improved efficiency for underfloor heating, and an improved aesthetic over the dull surface of standard concrete floors.