Top-rated fence painters.

Get matched with top fence painters in Hernandez, NM

Enter your zip and get matched with up to 5 pros

Need a pro for your fence painting project in Hernandez, NM?

Select your specific project to find the pro for you.

TRUSTED BY HERNANDEZ, NM HOMEOWNERS

  • Average homeowner rating star icon4.8
    Average homeowner rating
  • Verified reviews icon10
    Verified fence painting services reviews

Find Fence painters in Hernandez

No results for Fence painter in

Try adjusting your search criteria.
Fence Painting questions, answered by experts

Generally, these steps are included in exterior house painting:

  • Prepping and protecting the areas not being painted

  • Scraping away loose paint

  • Cleaning off dirt, grease, and debris

  • Caulking gaps and openings

  • Priming with a quality paint primer

  • Painting the prepared areas, including trim and accents with chosen paint finish

  • Adding a second coat

  • Cleaning up the site and disposing of tape, plastic, and drop cloths

You should repaint your fence every 1 to 3 years, depending on the appearance of wear and tear. Weather and usage will factor into how often you should paint another coat on your fence. If you need to replace a few fence boards or posts, you may want to consider repainting the fence to help protect the rest of the fence as well as the new pieces against damage and deterioration from being exposed to the elements.

When applying multiple coats, wait four to six hours for each coat to dry. Not waiting long enough can result in streaks, peeling, and uneven color. Plus, it will be more difficult to discern where the second coat has already been applied.

Wood stain is typically dry to the touch within 6 to 12 hours, but it is not fully cured at this point. You should wait at least 24 hours before applying a second coat or a protective finish. For surfaces like decks, avoid walking on them for at least 24 to 48 hours, and wait even longer before placing furniture. The full curing process can take from 24 hours to one week, depending on the type of stain. Factors like high humidity and cold temperatures can extend drying and curing times, so it's wise to allow for extra time in these conditions.

Stain is meant to be absorbed by the porous wood, allowing some of the natural grain to show through. With that in mind, you don’t want to add more stain than the wood can absorb, as you risk covering up its natural markings. Generally, two coats is the maximum you should do, although very dense hardwoods may only be able to take a single coat.

The Hernandez, NM homeowners’ guide to fence painting services

From average costs to expert advice, get all the answers you need to get your job done.