Get matched with top electricians in Neshanic Station, NJ

Just like apples in a bunch, one bad outlet can cause other outlets to stop working. This is especially true if the outlets are connected in a series on the same circuit. When one outlet develops a fault, it can spread to every outlet downstream of the original.

It can be safe to buy or live in a house with knob and tube (K&T) wiring, but only if the system is in good condition, functional, and has been thoroughly inspected and approved by a licensed electrician. Never purchase a home with K&T wiring without getting a professional electrical inspection first.

Key considerations include:

• Safety and Condition: An inspector will verify that the wiring is safe and has not deteriorated. Over time, the insulation can wear away, leaving exposed wires that pose a significant fire or shock hazard.

• System Capacity: The electrical service should be at least 60 amps. However, even at this capacity, K&T systems often struggle to handle the demands of modern appliances and electronics.

• Lack of Grounding: Knob and tube wiring is an ungrounded system, which is a safety concern for many modern devices.

• Ongoing Maintenance: If you live in a home with K&T wiring, it's recommended to have it inspected by an electrician every one to two years to ensure it remains in safe working order.

Ultimately, any inspection or modification of a knob and tube system should always be performed by a certified professional.

A small sump pump running infrequently uses an average of 10 kilowatt-hours (kWh) of electricity per month. The average cost for electricity is $0.171 per kWh. The size and use frequency affect how much electricity it uses. Sump pumps average one-third to one horsepower (hp) motors. One hp is equal to 745.7 watts. Watts multiplied by the time your pump is running divided by 1,000 equals your average kWh. Multiply kWh by your average cost of electricity. In areas with high rain or a marsh basin, the average cost can be as high as $15-$25 a month.

If you have a lamp that flickers or doesn’t stay on, it’s a sign that it’s time to rewire it. Additionally, it’s important to rewire antique lamps so they’re safe to continue using without the risk of an electrical fire. If the plug on your lamp is more than 15 years old or you notice poor performance like flickering, you should hire a lamp repair service to rewire it. If you’re upgrading the bulbs in an antique lamp from incandescent to LED or CFL bulbs, rewire it so it’s compatible with the modern bulbs.