Get matched with top locksmiths in Hawthorne, NJ

Expect to pay between $50 to $200 if you hire a locksmith to change your locks. That figure includes labor and the cost of basic hardware. The cost will naturally be higher if you plan to install more expensive locks, like smart locks, and if you need a lot of them.

Homeowners can save money by replacing locks themselves. A typical rekeying kit costs about $10 to $25. The only additional cost is purchasing new house keys, and those are no more than a few dollars per key. If you want to replace the locks on your own completely, the main cost is the price of the locks themselves. A standard knob-style lock starts around $25, while electronic locks and smart locks will run in the hundreds of dollars. The only additional tools you should need are a tape measure, screwdriver, and screws if they are not already provided.

If you’re having an issue turning the key inside a lock, chances are there is dust or dirt buildup within the cylinder. The easiest solution is applying a dry lubricant to the lock, which loosens the dirt buildup. You may need to turn the key a few times for it to work properly again.

It is best to use a dry lubricant, such as a Teflon-based option, for door locks. Unlike popular oil-based lubricants, dry lubricants leave a non-stick, water-repellent coating that does not attract dust, dirt, and other debris. Using an oil-based lubricant can cause these particles to build up inside the lock, making it difficult to operate or even damaging the internal mechanism. You can find dry lubricants, some of which are made specifically for locks, at most hardware stores.

If you don’t have your original key, the easiest way to obtain a copy is to call a locksmith. For house keys, your locksmith has several options for configuring a new key: 

• They can input a lock’s identification code into a database to obtain key-cutting instructions.

• They could analyze the lock cylinder to determine how to cut a new key.

• They can create an impression of the lock cylinder from which to cut a new key.