"The insulation crew was prompt, professional, and did a fantastic job installing my new insulation. I highly recommend this company for anyone in need of insulation services."
"The insulation has made a significant difference in my home. Prior to the insulation I had so many drafts and cold areas, now .y hone is much warmer and no drafts. I'm also saving on fuel cost. I'm 100% ?"
"They were fabulous. We could not have been happier with the work. They were so efficient and did such a great job. They cleaned up after themselves. They did an awesome job. I would recommend them to anyone!
We got 3 estimates to insulate approx 2500 sq ft of attic and install insulation in foundation crawl space. Howard from Metro gave us estimate of $4500 for 15" of cellulose insulation for the attic..that was twice the amount of insulation from the lowest estimate ( 7" + crawlspace $3000), but didn't include crawlspace. Highest estimate was approx $6,000 for 12"+ crawlspace. Howard from Metro said we would be better off with more insulation in attic and over garage then with less and insulation in crawlspace. He brought in at no cost to us, someone to do infrared scan of house for energy leakage. How was found to be tight but he recommended to better seal front door (I did myself). We went with Howard, crew showed up on time, did what they had to, very polite, clean. Oh...almost forgot...he also installed two ducts from bathroom exhaust fans that were vented into attic (no charge)...I was having that section of roof redone in spring and roofers attached vents in roof to ducts (went very smooth). I would highly recommend Metro."
This was a $150 big deal purchase. I don't think that went very well. It did not really mitigate our issues. Later on we brought in other contractors from a different service to come in and seal some cracks and whatnot. They just sort of did the bare minimum. I think they charged more than the price of the deal because it was a larger surface area. They did not really solve any of the issues and hey didn't bring to light any other things that could be causing our insulation problems.
"We had been living in our house for 5 years and although the kitchen was a new addition, every winter my wife & I had noticed how noticeably the temperature differentiated especially after the winter of 2014/15. And because it was a dirt floor with some wood and old construction debris strewn about. I was not so keen on staying down there. In doing my own investigation there was some piping and insulation under floor. So when investigating estimates we called a number of "green" companies. Out of the three companies that came, only Frank Petrullo with Eco Green Solutions, noticed the mold and a water leak coming from fridge line. He took the time to show me where the water was coming, how mold had proliferated on the wood floor joists and beams. The dirt floor was somewhat moist and light was visible from outside along foundation rim contributing to the mold and moisture in crawl space. He explained each of our options and detailed the steps in sections of each estimate. We opted to have a plumber fix the water leak, then franks crew came in, cleaned up the mold, then layed down the crawl space membrane, finally insulating floor & rim joist. All in under two days. The crew showed up on time, left the open sections of the house clean, and we immediately noticed a difference in kitchen and rest of house. Walking around bare foot in kitchen is more comfortable, the kitchen is less noisy, and house humidity is maintained. "
"Joe did a great job on this, our dining room was a add on to connect the original home and the garage and had no insulation and boy in the winter it was unusable as well as the kitchen basically (the best part of the house). Joe came and drilled small holes in the attic floor that they sealed up later to allow for blowing in the insulation. And they cleaned up well. we have a 20 month old but there was nothing left over for the baby to put in her mouth. Joe is great! Our dining room is toasty and the kids can play in there year-round Plus they are were less than half of the expensive "efficiency" guys PSEG sent over. Those providers wanted to charge $10,000+ for basically the same job."
"It went pretty well. My house didn't get any warmer, because I discovered that I needed windows. For some reason, they couldn't tell me that I needed windows. I put some plastic over some of the windows, and the change was almost instant. I would have rather put the money I spent for the insulation into putting in new windows. They were professional, and they did a good job. They just missed that I needed windows instead of insulation."
"I was emailed photos of the step by step removal of old insulation, mold treatments ant the poly and R30 insulation install and everything went well, I'm out of state and JohnForsyth was my contact and he keep us informed. A project well done. "
If the temperature outside is around 90 or 100 degrees with the sun beating on your home’s roof, it’s common for the attic temperature to reach 150 degrees or more. This excessive heat shows the importance of having a radiant barrier in place along with insulation. The radiant barrier reflects the heat entering the attic back upward, keeping your home’s temperature more consistent.
Water freezes at 32 degrees Fahrenheit, but the actual temperature that can cause frozen pipes can vary. Generally, it takes 12 hours for pipes to freeze at 32 degrees Fahrenheit.
Uninsulated pipes can freeze if it’s 20 degrees Fahrenheit or colder for over three hours. If your pipes are insulated, it can take six hours or longer for pipes to freeze. Note that some pipe types freeze more often than PEX pipes. Copper pipes freeze more often because the copper conducts energy and loses heat quickly.
You don’t need to staple insulation, as your drywall and studs will hold it into place. But if you already have a staple gun and staples lying around, it can help keep the product in place and avoid any shifting. But, most experts agree it’s an unnecessary step.
If you’re adding a vapor barrier, you will need to staple that in place.
Yes, usually you will need some kind of vapor barrier on the exterior walls when the framing is attached to concrete and masonry surfaces.
The best type of attic insulation depends on where you live, your budget, and what stage of construction the attic is in. For example, if you're building a house, then structural insulated panels are a worthy investment since they're easy to install during construction and they're the most energy-efficient type of insulation.
Additionally, if you live in a very warm climate, then you can potentially save quite a bit of money by opting for reflective insulation, which is more affordable than comprehensive insulation but doesn't work well for cool climates. Blown-in, loose-fill, and spray foam insulation are all great options for attics in moderate climates.
The Emerson, NJ homeowners’ guide to insulation services
From average costs to expert advice, get all the answers you need to get your job done.
The cost of blown-in insulation in New York, NY varies depending on the type of insulation, labor, prep work, and more. Learn more about the cost factors in this guide.
New insulation makes your home more comfortable and boosts energy efficiency. Use this guide to budget for insulation installation costs in New York, NY.
Attic insulation removal costs in New York, NY, vary based on multiple factors, including why you're removing it and how easy it is to complete the task.
Removing old insulation may be necessary for upgrading your insulation. Keep reading to see if you should remove old insulation before adding new insulation.
If you need to add insulation to your home, you’re likely wondering, who installs insulation. Learn why it’s best to hire an insulation pro for this project.