Get matched with top roofers in Emerson, NJ

You should definitely be wary of roofing contractors who offer significantly lower prices than their competitors. Most roofers in the area are all dealing with the same cost of materials, and labor costs are often comparable, too. If they’re significantly cheaper than other companies around, it could be a scam. Read reviews and ask other roofing companies and contractors if they’ve heard of the suspected scamming company.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.

Architectural shingles and impact-resistant shingles aren’t mutually exclusive, which means some architectural shingles are impact-resistant shingles. Architectural shingles are thicker and more durable than standard 3-tab shingles, and they become even stronger when they also have high impact resistance and wind resistance ratings. The most durable shingles for areas with extreme weather are architectural or luxury shingles that have a Class-4 impact resistance and a Class-H wind resistance that can stand up to winds reaching 150 mph.

If you’re looking for a cost-effective alternative to a traditional chimney, consider having a dummy chimney installed. Dummy chimneys can either be aesthetic-only or fully functional and can be installed on both new and older homes. Whether installed to match your neighborhood’s aesthetic or to vent your chimney, dummy chimneys are made out of a Glass-Reinforced Plastic (GRP) core, then covered with brick or stone slips to look like a traditional chimney.