"QS&L did a masterful job of removing and reconstructing a 3500 square foot deck while working through the winter of 2021-2022. The quality of the work was first class. I highly recommend QS&L Builders if you are looking for someone who shows up and gives a full dayâ s work. They were efficient, responsive and cooperative throughout the entire project. We are thrilled with the end result. Thank you Quade and Gary."
IronCAD LLC (Residential Plans & Carpentry Services)\nEdgar Almonte \nBased in Lower-NH\n\nBeen working in the Building, Fabrication and Design Planning Field for 20yrs.\nWork-Travel Radius included NH & MA, and Lower-ME.\nExpertise in a wide-variety of disciplines and trades.\nSole-proprietor for Small to Mid-Size Jobs in which Bids will be reasonable. \nInsured Contractor \n
"Mr. Cheney, Thank you for your time and effort on my behalf. I used the 800 number you gave me and had the parts I needed in three days. Again, many thanks, Edward A. Loranger"
"Everything went wonderfully with this company. They were very professional, listened to exactly what my problem was, and explained to me how they were going to diagnose the problem and/or solve it before doing any actual work. Once they started, the team (three people came) worked together like a well-oiled machine. One was in the room with diagnostics, one was at the fuse box looking for possible problems there, and the third went into the crawlspace beneath our house to look at the physical wiring. Once the problem was found (there was a faulty wire beneath the house that had come loose from the junction box), it was fixed and tested within minutes and another full diagnostic was done to make sure there were no other possible issues. They cleaned up after themselves very neatly. They also replaced the light switch with a dimmer switch at no extra cost! Well within my budget, and came in even lower than their original (FREE) estimate! I would highly recommend this company to anyone in the Bergen County area. "
Merrimack Valley Fencing is a locally owned and operated company serving New Hampshire and Northeast Massachusetts. We specialize in all types of fencing and pride ourselves on customer satisfaction.
We have the experience and we are committed to providing quality workmanship and superior customer service on all our applications. We at Alliance flooring strive to maintain our reputation as a high quality, very service oriented company with our main focus being customer satisfaction.
Whether you need a permit to build or install a fence depends on several factors, including your location, the fence's height, its placement in your yard, and the materials used. In many cities and highly populated areas, a permit is required, especially for fences taller than 6 feet. Conversely, rural areas may have fewer restrictions. Typically, backyard privacy fences 6 feet or shorter do not require a permit, while front yard fences often have a lower height limit, sometimes as low as 3.5 feet. There can also be exceptions for properties in mixed residential-commercial zones. It's best to check with your local building inspection or zoning department to understand the specific requirements, height restrictions, and location rules for your area. A professional fence installer can help you navigate this process and often secure the necessary permits for you, though this may extend the project timeline.
Most people prefer to keep the fence level by “stepping” the fence when running a horizontal fence over a slope. Stepping involves raising each panel between the posts as the fence moves over changes in slope, giving the fence line the appearance of stair steps. While this may be the preferred method of running a horizontal fence up a slope, there’s nothing wrong with installing your fence so it follows the undulations in the ground instead.
Typically, a fence requires one to two coats of stain. The exact number can vary depending on the porosity of the wood. For specific guidance, it's best to check the manufacturer's instructions. After applying the first coat and letting it dry completely, you can assess the finish. If it appears patchy, uneven, or you want a more saturated color, a second coat is recommended. An extra coat can also help cover lap marks.
Yes, installing wrought iron fencing will usually require a building permit, as do all types of fencing. Building permits for wrought iron fencing typically cost between $150 and $500, and the price will vary based on where you live and how much your local building department charges. You may also need to pay for a property survey if you’re installing wrought iron fencing on your property line. This type of survey can cost around $500, but it prevents issues with building on neighboring properties, which can be much more expensive in the long run.
DIY is feasible with the proper tools and manual labor, though experienced installers ensure durability and precise alignment.
The Silver Lake, NH homeowners’ guide to fencing services
From average costs to expert advice, get all the answers you need to get your job done.
Chain-link fences are among the most affordable options available. Use this chain link fence cost guide to see what your fence installation will total.
Fence repair costs depend on the extent of damage, your fence's material, and how much of the fence you need to fix. Explore all the price factors in this guide.
