Top-rated fencing pros.

Get matched with top fencing pros in Freedom, NH

Enter your zip and get matched with up to 5 pros

Need a pro for your fencing service project in Freedom, NH?

Select your specific project to find the pro for you.

Find Fencing pros in Freedom

Avatar for Simpson's Landscaping
Simpson's Landscaping
3.8(
8
)

Serving Freedom, NH and surrounding areas

Approved

In business since 2005

Free estimates

Warranties offered

"Mike was prompt to our estimate appointment. He was professional and informative. He understood our needs and was helpful with suggestions. We are big do it yourself people so decided to try our luck at our project with help from a neighbor"
Outdoor firepit patio
Outdoor firepit patio
Custom Stainless Railing
Patio Walkway Project
Small Retaining Wall Patio

+32

Response time1 day
22 neighbors recently requested a quote
Recommended by100%of homeowners
Avatar for Jason Cameron
Jason Cameron
5.0(
1
)

Serving Freedom, NH and surrounding areas

Approved

In business since 2020

Free estimates

Small jobs welcome

"We needed same day confirmation (photos) of a tenant move and a lockbox installed. Jason responded quickly and efficiently. We will definitely consider Jason for future needs."
Response time2 hrs
4 neighbors recently requested a quote
IronCAD
New to Angi

Serving Freedom, NH and surrounding areas

Approved

IronCAD LLC (Residential Plans & Carpentry Services)\nEdgar Almonte \nBased in Lower-NH\n\nBeen working in the Building, Fabrication and Design Planning Field for 20yrs.\nWork-Travel Radius included NH & MA, and Lower-ME.\nExpertise in a wide-variety of disciplines and trades.\nSole-proprietor for Small to Mid-Size Jobs in which Bids will be reasonable. \nInsured Contractor \n

Avatar for New England Home Renovations LLC
New England Home Renovations LLC
4.0(
311
)

Serving Freedom, NH and surrounding areas

In business since 1983

Free estimates

Emergency services offered

"Everything went wonderfully with this company.  They were very professional, listened to exactly what my problem was, and explained to me how they were going to diagnose the problem and/or solve it before doing any actual work.  Once they started, the team (three people came) worked together like a well-oiled machine.  One was in the room with diagnostics, one was at the fuse box looking for possible problems there, and the third went into the crawlspace beneath our house to look at the physical wiring.  Once the problem was found (there was a faulty wire beneath the house that had come loose from the junction box), it was fixed and tested within minutes and another full diagnostic was done to make sure there were no other possible issues.  They cleaned up after themselves very neatly.  They also replaced the light switch with a dimmer switch at no extra cost!  Well within my budget, and came in even lower than their original (FREE) estimate!  I would highly recommend this company to anyone in the Bergen County area.
"
Before
After's
New boiler install
Removal of cast Iron to PVC.
Additional Photos

+37

Recommended by89%of homeowners
Showing 1-10 of 34
Fencing questions, answered by experts

In terms of materials, chicken wire mesh will be the most inexpensive option to use when building your fence. The downside is that it’s not the most attractive garden fence option. In a similar vein, you could choose a DIY fence made out of repurposed items, like car tires, or wooden pallets, either of which would be free to collect. 

You can't build a fence against your neighbor's fence if it touches or is attached to it unless you get explicit permission from your neighbor. Most municipalities recommend building a fence about two feet away from your neighbor's fence to allow access for fence repair and mowing.

The maximum recommended slope on which you can build a racked or stepped fence is 45 degrees. After that, construction becomes quite tricky and may require the use of retaining walls or terraces to make the fenced area flatter.

A silt fence should be buried in a trench that is 6 to 12 inches deep. A depth of at least 6 to 8 inches is necessary to prevent water and sediment from running underneath the fence. A deeper trench, up to 12 inches, provides better anchoring during wet and windy weather. To ensure proper installation, look for a red line on the silt fence fabric, which often indicates the correct burial depth. Always adhere to local guidelines and regulations; a professional contractor will be familiar with these requirements.

Silt fences are very effective when installed correctly and used in proper locations. However, there are places where they don’t work as well. This includes property with a concentrated water flow, where runoff could pool or cause a flooding hazard. You’ll also want to use caution when installing in areas susceptible to landslides. Your contractor will follow state guidelines and know when an alternate solution is more effective.

The Freedom, NH homeowners’ guide to fencing services

From average costs to expert advice, get all the answers you need to get your job done.