Top-rated fencing pros.

Get matched with top fencing pros in Sandwich, NH

Enter your zip and get matched with up to 5 pros

Need a pro for your fencing service project in Sandwich, NH?

Select your specific project to find the pro for you.

TRUSTED BY SANDWICH, NH HOMEOWNERS

  • Average homeowner rating star icon4.3
    Average homeowner rating
  • Verified reviews icon13
    Verified fencing services reviews

Find Fencing pros in Sandwich

QS & L Builders
3.6(
49
)

Serving Sandwich, NH and surrounding areas

Approved

In business since 2010

Free estimates

Small jobs welcome

"QS&L did a masterful job of removing and reconstructing a 3500 square foot deck while working through the winter of 2021-2022. The quality of the work was first class. I highly recommend QS&L Builders if you are looking for someone who shows up and gives a full dayâ s work. They were efficient, responsive and cooperative throughout the entire project. We are thrilled with the end result. Thank you Quade and Gary."
Roofs
Ribbed panel
Roofs
Roofs
Response time2 days
3 neighbors recently requested a quote
Recommended by100%of homeowners
Wolf Construction
4.3(
14
)

Serving Sandwich, NH and surrounding areas

Approved

In business since 2020

Free estimates

Customers say: True professional

"Great communication, completed the job as we discussed, very considerate of where my car was so it wouldn't get damaged. Cleared all the debris, deadfall, pine cones , pine needles and trimmed off the low branches. Would hire again, great man to work with and I'm very happy with the results."
Response time2 days
Response rate92%
10 neighbors recently requested a quote
IronCAD
New to Angi

Serving Sandwich, NH and surrounding areas

Approved

IronCAD LLC (Residential Plans & Carpentry Services)\nEdgar Almonte \nBased in Lower-NH\n\nBeen working in the Building, Fabrication and Design Planning Field for 20yrs.\nWork-Travel Radius included NH & MA, and Lower-ME.\nExpertise in a wide-variety of disciplines and trades.\nSole-proprietor for Small to Mid-Size Jobs in which Bids will be reasonable. \nInsured Contractor \n

Avatar for Re-Enlightened
Re-Enlightened
5.0(
6
)

Serving Sandwich, NH and surrounding areas

In business since 2021

Free estimates

Credit card accepted

"Great experience overall. Jay and his team were very knowledgeable and determined. They replaced my entire kitchen with nee cabinets and countertops. Along with laminate floor & backsplash. Highly recommend."
Response time4 days
Recommended by100%of homeowners
Winnipesaukee North Construction, LLC
5.0(
6
)

Serving Sandwich, NH and surrounding areas

In business since 2014

Emergency services offered

Small jobs welcome

"Project was started on the day scheduled. Bob was very prompt to address a few concerns we had when the project first started. We are very satisfied with the end result and would definitely use this company again if we have other projects. We highly recommend Bob and Winnipisaukee North Construction."
Response time2 days
Recommended by100%of homeowners
Avatar for New England Home Renovations LLC
New England Home Renovations LLC
4.0(
311
)

Serving Sandwich, NH and surrounding areas

In business since 1983

Free estimates

Emergency services offered

"Everything went wonderfully with this company.  They were very professional, listened to exactly what my problem was, and explained to me how they were going to diagnose the problem and/or solve it before doing any actual work.  Once they started, the team (three people came) worked together like a well-oiled machine.  One was in the room with diagnostics, one was at the fuse box looking for possible problems there, and the third went into the crawlspace beneath our house to look at the physical wiring.  Once the problem was found (there was a faulty wire beneath the house that had come loose from the junction box), it was fixed and tested within minutes and another full diagnostic was done to make sure there were no other possible issues.  They cleaned up after themselves very neatly.  They also replaced the light switch with a dimmer switch at no extra cost!  Well within my budget, and came in even lower than their original (FREE) estimate!  I would highly recommend this company to anyone in the Bergen County area.
"
Before
After's
New boiler install
Removal of cast Iron to PVC.
Additional Photos

+37

Recommended by89%of homeowners
Avatar for Southern Maine Fence LLC
Southern Maine Fence LLC
New to Angi

Serving Sandwich, NH and surrounding areas

In business since 2019

Free estimates

Credit card accepted

We specialize in all types of fencing needs from your picket fence for your home to security fences for you business. With 25 plus years of experience in the industry you know your project will get done right the first time!

This picture was taken by the customer and sent to me after that had the walkway and landscaping done. The fence looks absolutely beautiful with all the landscaping!
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+7

Showing 1-10 of 34
Fencing questions, answered by experts

The bottom strand should sit between 12 to 15 inches from the ground. If you have a problem with small critters, you can aim for 8 inches. Three-strand fences should be 16 to 19 inches apart, four-strand fences should be 10 to 12 inches apart, and five-strand fences should be 8 and 10 inches apart.

Knowing how close to the property line you can build a fence is an important planning step in your fence installation project. In many U.S. states, you are allowed to build a fence directly on the property line as long as your neighbor signs off on the plan. But check with your state government because some states and municipalities require a couple of inches before your property line.

Maintain your wattle fence by inspecting it at least twice per year for loose weaving and degrading branches. Replace any seriously degraded sections, ensure water drains properly around the posts, and trim any sprouting branches if you used green wood. If you notice the weave loosening, you can often tighten it by gently pushing down on the top branches. You can also apply a natural wood preservative every two to three years to extend the fence's lifespan.

A fence gate can sag for several reasons. The issue often stems from the hardware, such as damaged or bent hinges, or loose screws that can no longer support the gate's weight. The gate frame itself might also have come out of square due to failing supports. Alternatively, the problem may not be the gate but the supporting fence post, which could be leaning or out of place. In many cases, fixing a sagging gate is as simple as tightening the hinge screws or upgrading to more robust hinges.

Whether you need a permit to build or install a fence depends on several factors, including your location, the fence's height, its placement in your yard, and the materials used. In many cities and highly populated areas, a permit is required, especially for fences taller than 6 feet. Conversely, rural areas may have fewer restrictions. Typically, backyard privacy fences 6 feet or shorter do not require a permit, while front yard fences often have a lower height limit, sometimes as low as 3.5 feet. There can also be exceptions for properties in mixed residential-commercial zones. It's best to check with your local building inspection or zoning department to understand the specific requirements, height restrictions, and location rules for your area. A professional fence installer can help you navigate this process and often secure the necessary permits for you, though this may extend the project timeline.

The Sandwich, NH homeowners’ guide to fencing services

From average costs to expert advice, get all the answers you need to get your job done.