Epoxying over asbestos tiles is generally considered a safe option when done correctly. Epoxy acts as a sealant, encapsulating the asbestos tiles and preventing the release of asbestos fibers into the air. The key is ensuring that the asbestos tiles are in good condition, firmly adhered to the substrate, and not damaged or deteriorating. This method is only appropriate for tiles that are undamaged and securely in place. If the asbestos tiles are already loose, damaged, or deteriorating, encapsulating them with epoxy may not be a sufficient solution, as it might not address the potential for ongoing asbestos exposure.

If you own a stereo microscope, you should be able to see the fibers. The stereo microscope often can perform magnification up to 50x. But unless you have experience viewing asbestos fibers, you may not know exactly what you are seeing. Some fibers are curly, while others are long and straight. Blue, brown, white, and gray colored fibers are all possible.

Sampling typically takes 1-3 hours, and depending on the provider, lab results are available within 2-7 days.

Unfortunately, home inspections do not check for asbestos because of the liability factor involved. That’s why you should hire a trained professional with specialized equipment to test for it. 

They will inspect all areas of the home and take samples of various materials to test. Opting for an asbestos inspection can prevent the risk of exposure to this hazardous material and save on costly repairs that may be required.