Get matched with top drain pipe installers in Gibbon, NE

If your toilet is still leaking after replacing the toilet flapper, then you may not have installed the toilet flapper correctly. Double-check that you have placed the flapper over the overflow tube correctly, and check the flapper chain is at the right length. If your toilet is still leaking, then you may have another problem on hand. For example, you may need to replace the toilet wax ring or replace the toilet fill valve if your toilet is wobbly and leaking from around the base.

To measure pipe size, you can use a ruler, a soft tape measure, or a caliper. You can find a special pipe caliper that has iron or copper pipe sizes already marked. Rulers work if the end of the pipe is exposed. If your pipe is still attached to the plumbing, you’ll need to go for a soft tape measure or caliper.

Toilet augers are hand-held drain snakes. Most of them come with 3 to 6 feet of cleaning cable and a curved, plastic elbow sleeve to protect your toilet bowl. If your clog does not go beyond the toilet’s wax seal, a 3-foot auger would be sufficient. Otherwise, you may need a 6-foot auger to unclog the drain.

The most common situation in which you should turn off the main water shut-off valve is if there’s a leak in your home, such as in the kitchen or bathroom. Turning off the water supply can prevent further water damage.

You may want to turn off the valve before leaving for an extended period, in case of leaks or pipe bursts while you’re gone. If you’re going to work on plumbing fixtures or appliances, it’s also a good idea to shut off the main valve to ensure no water flow during repairs or installation.