Best toilet pros near Cedar Bluffs, NE

Yes, you should screw your flange to the subfloor, including cement. The best way to get this done is to predrill holes into the concrete using a hammer drill and a ¼-inch concrete bit. Be careful when you’re ready to bolt your flange down, as you can accidentally crack it. You can avoid this issue by not installing the screws too deep. Or, you can opt for a flange with a stainless steel ring so you don’t have to worry about cracking the plastic.

The first step to clearing the air in a line is to locate the cause. This is usually a blockage in either the drain or the venting system. Once you clear the issue, flush the system by actually flushing the toilets repeatedly. This should allow the trapped air to escape, thus clearing the lines. Don’t be surprised if there is increased bubbling as the air makes its way through the system. 

You should replace your toilet at least every 25 years. While toilets are pretty sturdy appliances, they don’t last forever. Even if you aren’t ready to invest in the cost of a bathroom remodel yet, just replacing your toilet will help freshen up your space and keep your bathroom functioning.

The cost to install a new toilet typically runs from $225 to $530. This doesn’t include the price of the toilet itself, which can cost $90 to $1,500 depending on the model and features you choose. You can save money if you choose to install a toilet yourself. However, you might want to hire a pro for this project.

"Due to the many complexities of replacing a toilet flange, it is typically a job best left to the pros," says Jeff Botelho, Angi Expert Review Board member and plumber. "Many times it isn't as simple and straightforward as 'pop off the old one and pop on a new one' because the flange is either glued on (PVC/ABS), soldered on (brass/copper), or caulked in place with a lead & oakum joint (cast iron) and none of these things can be easily reversed without years of training and repetitive practice."