Get matched with top door pros in Pinnacle, NC

Several types of deadbolts are available, including single-cylinder, double-cylinder, rim, smart, and electronic deadbolt locks. The most common type found in U.S. homes is the single-cylinder deadbolt, which uses a key on the exterior and a thumb turn on the interior. A double-cylinder deadbolt features two locking mechanisms and requires a key to be operated from both the inside and the outside.

As long as you do it carefully, you can sand and restain hollow core doors. However, it’s risky because the veneers on hollow core doors are so thin that sanding and restaining might cause damage to the doors. If you do move forward with this project, sand the doors lightly with a medium-grit sandpaper.

A prehung door is a door that comes ready to install, already mounted in its frame with hinges and stop molding included. Because everything is factory-aligned, installation is quicker, more precise, and convenient, as you don't need to drill or align the hinges yourself. This makes it a smart option if your current frame is damaged, uneven, or if you're working on a new build. Installation involves fitting the entire unit into the rough opening, shimming and leveling it, and then securing it. If you are replacing an existing prehung door, the process is even simpler, often just requiring you to swap the old unit for the new one and secure it with a few screws. Prehung doors typically cost only slightly more (around $20) than a door slab alone, making them an efficient choice.

Yes, door hinges can sag over time. This usually happens due to things like repeated use, loose screws, worn hinge pins, or the door's weight pulling on the frame. When hinges sag, you'll often notice the door sticking, dragging, or not latching properly. Tightening the screws or replacing worn parts can usually help to realign the door.