Top-rated drywall insulation pros.

Get matched with top drywall insulation pros in Coats, NC

Enter your zip and get matched with up to 5 pros

Need a pro for your drywall insulation project in Coats, NC?

Select your specific project to find the pro for you.

TRUSTED BY COATS, NC HOMEOWNERS

  • Average homeowner rating star icon4.6
    Average homeowner rating
  • Verified reviews icon66
    Verified drywall insulation services reviews

Find Drywall insulation pros in Coats

Avatar for Triangle Radiant Barrier
Triangle Radiant Barrier
4.9(
58
)
Blown-In Insulation - Install or UpgradeInsulation - Install or Upgrade

Serving Coats, NC and surrounding areas

Approved

In business since 2016

Free estimates

Warranties offered

"Everything went according to plan. Crawlspace insulation was replaced and closed space was sealed up. A air inducer was also installed. The environment is totally different down there now and is much closer to the temperature of the house. I kept my vapor barrier the same."
Rafter installation of Radiant Barrier by Triangle Radiant Barrier in Raleigh, NC.
Crawl space encapsulation by Triangle Radiant Barrier in Fuquay-Varina, NC.
Radiant Barrier installation on attic rafters. Reduce attic summer heat 30-40 degrees Fahrenheit, on average. Increased home comfort, lower cooling costs, extended HVAC service life, increased home resale value. Transferable lifetime warranty on our Radiant Barrier installation.
Additional Photos
Additional Photos

+28

20 neighbors recently requested a quote
Recommended by94%of homeowners
Avatar for Evergreen Foam and Insulation
Evergreen Foam and Insulation
5.0(
2
)
Blown-In Insulation - Install or Upgrade

Serving Coats, NC and surrounding areas

Approved

In business since 2007

Free estimates

Warranties offered

"Evergreen was great from start to finish! The salesman, Chris, was super helpful in answering questions and the install crew was on time, efficient, and cleaned up after themselves. Highly recommend to anyone needing spray foam or any other type of insulation."
Cathedral Dome
Dome Walls
Attic Space
Bedroom Dormer
Bedroom 1

+8

Response time2 days
Response rate100%
20 neighbors recently requested a quote
B & C Insulation
3.3(
2
)
Blown-In Insulation - Install or UpgradeInjection Insulation - Install

Serving Coats, NC and surrounding areas

Approved

In business since 2021

Free estimates

Small jobs welcome

company name-------is committed to excellence every aspect of our business.\nWe uphold a standard of integrity bound by fairness, honesty and responsibility\nin all of our jobs. We are a locally owned and operated business with more\nthan 1 year of experience serving --city state--- and surrounding areas. Call today\nand let us put our experience to work for you!

Response time1 day
Recommended by100%of homeowners
Avatar for SouthEast Atlantic Insulation, Inc.
SouthEast Atlantic Insulation, Inc.
4.9(
29
)
Blown-In Insulation - Install or Upgrade

Serving Coats, NC and surrounding areas

In business since 2022

Free estimates

Credit card accepted

"Bryce and the team at Southeast Atlantic Insulation did a great job insulating our garage. From the initial estimation process to the one-day installation, the experience was terrific."
Attic top
Attic top
Attic Top
Garage walls with Kraft
Garage walls with Kraft

+16

Response time2 days
Response rate94%
Recommended by93%of homeowners
Avatar for Prime Energy Group
Prime Energy Group
4.5(
58
)
Injection Insulation - Install

Serving Coats, NC and surrounding areas

In business since 2008

Free estimates

"Our builder had never used spray foam, so once we decided to go spray foam, we got a great education from Rich Brown of Prime Energy group. He was wonderful to work with, and helped guide us on some very important issues including HVAC sizing. His company had all their paperwork ready for Orange County NC inspectors, and he was very flexible given all the delays we experienced before we were ready. When our spray day finally was approaching (4 months after the initial consultation), Rich came out again to go through the job again with us, answer any last minute questions, and make sure he did not see any concerns for going forward. Once we were ready, the company sent two crews. Rich went through the job with them and they finished it in one day! The crews even did a good job of keeping the mess to a minimum, despite the fact the trimmed foam bits are very much like styrofoam to manage. The inspection went off without a blink, and the job looks great! I really would recommend them as top notch, and priced fairly for the level of job they did for us. My only remark for those considering spray foam: make sure all outlets, vent pipes or air inlets are in their final place and fastened down before spray. You cannot easily reposition or push them into place afterword, and who wants to damage their new insulation? Thankfully, we thought of that for the outside vents because those would have been a nightmare to fix. On inside, we had two outlets that were screwed only from one side rather than nailed and the dryer vent 'hutch' that was not fastened that were pushed out by the foam which are going to be difficult to fix. My husband will also have to pull the sides of our shower pan liner and cut some foam back before that area is tiled since the flexible liner pushed in, but that should be simple. We used open cell foam and are very happy with the results, and there are no weird odors or fumes after a day's curing. Call Rich, he knowns his stuff."
Energy Guarantee
Custom Home Bldr 1M+
Vaulted Ceiling
Wall section before
HVAC in HOT vented attic

+11

Recommended by100%of homeowners
Avatar for Farrell Holdings, Inc.
Farrell Holdings, Inc.
4.8(
18
)
Blown-In Insulation - Install or UpgradeInjection Insulation - Install

Serving Coats, NC and surrounding areas

In business since 2013

Free estimates

Credit card accepted

"Mike and Enrique showed up early and worked non-stop insulating my attic and my basement ceiling. I would recommend Farrell Holdings to anyone seeking to have insulation work done. Mike Morin explained exactly what he would be doing, before blowing the insulation in the attic he filled what he considered vulnerable or weak areas with a sealant. He did a pressure test before and after the application of the insulation to determine how well we would benefit from the added insulation. If you're looking for professionals this is the place to call."
Duct seal
After Air Seal
Air seal before
Air seal top plate
Blown insulation install

+1

Response time1 day
Response rate97%
Recommended by94%of homeowners
Showing 1-10 of 45
Drywall Insulation questions, answered by experts

Yes, drywall can hold a 50-pound TV. However, when mounting a TV, you’ll either need to attach it to wall studs or use drywall anchors. If you use anchors, make sure to buy a type that can hold at least 50 pounds. Molly bolts, threaded anchors, and toggle bolts are all good options. For extra support, you can also install a wall mounting plate with the anchors.

A common cause of separation between a wall and the ceiling is truss lift—this can happen to the ceiling of rooms directly under the attic when the seasons change and wood building materials dry out, shrink, and shift. Roof trusses often dry out at different speeds, and if the bottom pieces dry out faster than the top pieces, they can shrink and pull the attached drywall away from ceilings and walls, causing cracks. Fortunately, truss lift is only a cosmetic problem, not a structural problem, and you can fix it by separating the ceiling drywall from the roof trusses, and patching the cracks.

You can put drywall mud over paint to even out the surface or entirely resurface it. Sand the surface with 280-grit sandpaper, vacuum the debris and dust with a shop vac, and clean it with a slightly damp cloth. Allow the surface to dry. Apply drywall primer, especially if you’re skim-coating an entire wall. Apply the right type of drywall mud over the surface and smooth it with a trowel. Allow the layer to cure fully, then sand it before applying another layer or painting it.

Some painters will repair minor drywall damage. For repair work of any kind, it’s a good idea to hire the professional required for the job. Many painters will have the materials on hand and can add them to the total cost. While you may save some money, there is a chance the work will be subpar compared to a professional who specializes in drywall.

There are six levels of drywall finish, from 0 to 5, that refer to the amount of work performed during the finishing process.

Level 0: Drywall is hung with no finishing work.

Level 1: Tape is placed over the seams between drywall sheets.

Level 2: A thin layer of mud is applied over the tape and screw holes. This level is common for utility rooms or walls that will be covered.

Level 3: A full coat of mud covers the screw holes and tape, but the surface is not sanded. This is often used in garages.

Level 4: This is the most common finish for visible interior walls. It involves applying two coats of mud over seams and screw holes, with sanding between each coat, creating a smooth surface ready for flat paint.

Level 5: This is a high-end finish for luxury homes. It includes full taping, mudding, and sanding, plus a final skim coat over the entire surface before painting.

The Coats, NC homeowners’ guide to drywall insulation services

From average costs to expert advice, get all the answers you need to get your job done.