Get matched with top tv mount installation pros in Cherryville, NC

It’s worth hiring a TV-mounting professional to hang your TV to ensure the safety of your device and long-lasting results. If you’re investing in a large or smart TV, it’s worth preserving your investment to guarantee that it’s hung safely and correctly. Plus, a TV mounting professional can recommend the right wall mount based on the wall type and TV size and weight.

Yes, you can mount a TV on a brick wall as a DIY project. This process requires specific tools, such as a masonry drill and masonry bits, as a regular power drill is not sufficient for drilling into dense surfaces like brick. You will need to drill mounting holes directly into the bricks, not the mortar, to ensure there is enough support for the weight of the TV and its bracket. After drilling, use large plastic wall anchors or concrete screws to securely attach the TV mount.

In most cases, you should not put a TV on a fireplace mantel. The minimum width required to put a TV safely on a shelf or mantel is 10 inches, but pre-made mantels are usually too shallow, averaging at only seven inches deep. If you do choose to place a TV above a mantel, it should be mounted to the wall. However, do so cautiously as heat radiating from the fireplace could potentially cause damage to electronics.

You will be placing holes in the wall to hang the mounting bracket. If you’re mounting a large TV, the bolts in use could make significant holes around half an inch in diameter. Other than a few holes, though, the process of mounting the TV should not cause significant damage to the wall, unless you make an error and miss the wall stud, tearing out drywall. Should you decide to remove the mount later, the DIY drywall repair cost for a small hole usually is $10 to $30. It’s a repair you can do in a few minutes.