Best electricians near Browns Summit, NC

By nature, two-prong outlets aren't grounded—but the box they run to might be, which makes them safer. The safest way to test if an outlet is grounded is to purchase a circuit tester, which cost about $20 at home improvement stores. 

If you discover your outlet (or outlets) aren't grounded, know that this greatly increases your risk of personal injury and electrical fires. You may want to consider installing new three-prong ground fault circuit interrupter (GFCI) outlets. On average, the cost to install GFCI outlets is about $210 per outlet.

Smart meters send the readings over a wireless wide area network (WAN) to the power company. This network allows sending small amounts of data slowly over long distances, which is perfect for smart meter readings that occur monthly. If you would prefer a smart meter, contact your power company and consider springing for the cost of replacing your electric meter.

An average, 400-square-foot electric heated driveways consume approximately $3 per hour in terms of electricity. The price may slightly fluctuate depending on your local energy cost. A simple formula to calculate your heated driveway’s total wattage consumption is by multiplying the square footage by 50 watts and then dividing it by 1,000 to get the kilowatt number. Multiply that with your local energy cost per hour and there you have the hourly operating cost.

The cost to replace or install an electrical outlet can vary. On average, you can expect to pay between $125 and $215 per outlet, including labor and materials. For a standard 120v outlet, the material cost is typically between $10 and $50. Labor costs for an electrician usually range from $50 to $100 per hour. The total cost can be higher if there are complex electrical issues to resolve. Specialized outlets like GFCI or high-voltage types can cost up to $50 each for the material alone. If you are replacing many outlets throughout your home, the total project cost could be between $900 and $3,000, but you may receive a better per-outlet rate from the electrician.