Get matched with top mulch and topsoil pros in Simms, MT

Because gravel moves, it requires different maintenance than asphalt or concrete. Here are a few maintenance tips for your gravel driveway. Every few years (or as often as needed):

• Grade and level your driveway

• Rake to fill holes and ruts

• Compact any refilled potholes

• Remove weeds with herbicide or by hand

• Spray it with water to reduce the amount of dust kicked up

• Avoid using a snowplow during winter months

Key considerations include dust control, soil erosion prevention, and protecting local wildlife habitats through sustainable clearing practices.

A good driveway should have a solid base layer and a smooth surface layer of gravel. A base layer of larger gravel, around 1 to 2 inches, keeps the foundation stable and helps with drainage. For the top layer, smaller gravel, about 1/4 to 1/2 inches, compacts well and creates an even surface that’s easier to drive on. Using both ensures the driveway stays durable, drains properly, and doesn’t shift over time.

No one likes running out of materials during a project, so calculating the right amount of gravel needed for your driveway is an absolute must. Multiply your driveway’s length by width by the depth of the gravel (in feet). For gravel depth, convert to a decimal (i.e., 4 inches is 0.33 feet). This will give you the cubic feet of material that you need. 

If you’re looking for cubic yards, divide that above number by 27.