Get matched with top toilet pros in Glendive, MT

While a leak may seem small, even a gentle trickle of consistent moisture can lead to mold problems in your bathroom. Make sure you know how to check for mold if your toilet has been leaking for a while. Pooling water by your toilet also poses a risk for someone slipping on the slick floor of your bathroom. Finally, a leak of any size can lead to water waste that increases your water bill.

You generally cannot replace a 10-inch rough-in toilet with a 12-inch model without making significant plumbing updates. A 12-inch rough-in toilet will not fit a 10-inch rough-in space because the floor drain is in the wrong position. To accommodate the larger toilet, you would need to move the drainpipe, which could cost between $0.75 and $30 per linear foot, plus labor. In most cases, it is more cost-effective and simpler to purchase a new 10-inch rough-in toilet. However, it is possible to install a 10-inch rough-in toilet in a 12-inch space by using a longer connector.

Yes, you can pour water down the toilet to help it flush. For each flush, you’ll need 1 to 2 gallons of water for newer toilets or 3 to 5 gallons of water for older toilets. Rather than dumping the entire bucket in all at once, pour the water in slowly for the best results. If you’re pouring water down the toilet to help it flush after a clog, only use 1 gallon of hot water.

Generally, toilet leaking is not an emergency unless the leakage is severe. However, any leakage at the bottom should be addressed as soon as possible because it could lead to water damage to the floors, under the tiles, or into the walls. Leaks at the bottom can also lead to mold growth if unaddressed.