Get matched with top toilet pros in Baker, MT

Toilets typically connect to your main vent stack, a vertical pipe that runs through all finished levels of your home and exits through the roof. It’s located behind the walls, but if you have an unfinished basement or a utility closet, you may find a portion of it running the vertical length of the space. Some basement toilets use an air admittance valve instead, which is a small vent located in the wall directly behind the toilet that extends upward a few feet from the drain.

Whether or not a power-flush toilet is worth it depends on your toilet needs and your budget. If your bathroom sees a lot of use or you’re concerned about the toilet clogging, then a power-flush toilet may be the right choice. You should also check the pressure requirements to make sure your system can handle the necessary requirements. 

The average cost to replace a toilet seal ring is around $50 to $200 if you hire a pro to do the job. If you do it yourself, you’ll only need to pay for the supplies. Wax rings alone cost anywhere from $5 to $25 at hardware stores and can save you a lot of money compared to having a professional installation. At the same time, a licensed plumber knows how to properly install your new wax ring to prevent premature issues down the line.

If you don’t replace a toilet flapper, your toilet tank will continue to empty and fill repeatedly, wasting water and running up your utility bills. Checking the flapper is a good first guess when dealing with a constantly running toilet. However, if these problems continue after replacing the flapper, you may need to hire a plumber to check and fix any bigger problems.