Get matched with top pressure washers in University, MS

Jet washers can last for up to 10 years, but a more exact timeline for your jet washer depends on the frequency of use and maintenance. Some machines are given a rating of their approximate total hours of usage, which can help determine how long yours will stick around based on how many hours you use it each year. Aside from learning how to properly use the jet washer, you’ll want to keep it stored safely and securely so that it won’t rust or get damaged between uses.

You should wait until your pavers have completely dried and cured before pressure washing them. Wait at least three to five days, though some sealants may need up to an entire week. Rushing that timeline can mess with the finish, weaken the seal, or leave streaks that are tough to fix. Once the sealant has fully set, stick to a gentle approach. Keep the pressure under 1,500 PSI and hold the nozzle at least two feet from the surface. Anything stronger or closer can blast the joint sand loose or wear down the sealant you just applied.

It usually takes about two to four hours to pressure wash a 2,000-square-foot home. The exact time depends on how much dirt there is, the type of siding, and whether you’re doing it yourself or hiring a professional pressure washing service. A DIY job can take an average of six to eight hours, but you should plan for it to take an entire day. A pro can get the job done quicker.

Though bleach is a great way to kill mold and mildew around the house, you should never, under any circumstances, use bleach in a power washer. Bleach is a potent chemical that will destroy the pressure washer from the inside out. If you’re worried about killing mold and mildew, you should instead hire a pro who will use a safe but effective cleaning agent when pressure washing your home.