Get matched with top pressure washers in Bruce, MS

It’s important to avoid power washing your house during freezing temperatures because the excess water can freeze on surfaces and cause damage. You should also avoid doing this task during heavy wind or rain because the water spray becomes less effective and could spread debris. Don’t power wash your home if your siding is cracked, loose, or peeling because the high pressure can worsen the damage. Lastly, if your home has delicate materials like softwood or stucco, consider gentler cleaning methods to prevent structural harm.

You can power wash your screen porch floors on a low setting to avoid damaging the walls or screens they contact. If you’re careful, you can use a power washer on the lowest setting for your porch screens. However, using a hose with a spray attachment reduces the risk of ripping the screen mesh and works as well as a power washer.

The Centers for Disease Control and Prevention (CDC) recommends using an EPA-registered disinfectant product to disinfect a house properly. If such a product isn't handy, a strong bleach solution can disinfect high-touch surfaces. Before hiring a professional, be sure to discuss the type of chemicals and disinfectants they plan to use to ensure they’re safe for household use.

You should wait until your pavers have completely dried and cured before pressure washing them. Wait at least three to five days, though some sealants may need up to an entire week. Rushing that timeline can mess with the finish, weaken the seal, or leave streaks that are tough to fix. Once the sealant has fully set, stick to a gentle approach. Keep the pressure under 1,500 PSI and hold the nozzle at least two feet from the surface. Anything stronger or closer can blast the joint sand loose or wear down the sealant you just applied.