Get matched with top carpenters in Renova, MS

When hanging a door frame, it’s recommended that you use screws, not nails. Screws are more secure, easier to tighten, and easier to remove if you need to adjust the frame. On average, the cost to replace a door frame is about $400, but you can save on labor costs if you’re confident in your ability to DIY the project. 

You can choose 5/8-inch plywood or 3/4-inch plywood—anything thinner than these sizes may not withstand the impact of debris propelled by strong winds or can be easily torn off by intruders. Remember that the durability of the wood board is crucial, particularly for safeguarding your windows during severe storms. The effectiveness of using wood boards for protecting the investment you made in your home relies on using the appropriate material and ensuring proper installation.

Removing a load-bearing wall is best handled by professionals. However, if you have the skill set and decide to DIY the project, you will still need at least one additional person to assist you. Aside from helping with demolition, you'll need another hand to install the new support beam.

You can use a nail to find ceiling joists, but it’s not as reliable as a stud finder, and you’ll end up with lots of small holes in your ceiling. If the nail hits a joist, you'll feel increased resistance. Mark the spot with a pencil. Repeat this process regularly along the ceiling, 16 or 24 inches apart, until you've mapped out the joist locations.