Get matched with top percolation testing pros in Stewartsville, MO

Epoxying over asbestos tiles is generally considered a safe option when done correctly. Epoxy acts as a sealant, encapsulating the asbestos tiles and preventing the release of asbestos fibers into the air. The key is ensuring that the asbestos tiles are in good condition, firmly adhered to the substrate, and not damaged or deteriorating. This method is only appropriate for tiles that are undamaged and securely in place. If the asbestos tiles are already loose, damaged, or deteriorating, encapsulating them with epoxy may not be a sufficient solution, as it might not address the potential for ongoing asbestos exposure.

Asbestos fibers can stay airborne for 48 to 72 hours, depending on the home's ventilation. Fibers can linger longer in enclosed spaces with poor airflow. Because the fibers are microscopic, they can easily remain suspended, making them difficult to detect without professional equipment.

If you own a stereo microscope, you should be able to see the fibers. The stereo microscope often can perform magnification up to 50x. But unless you have experience viewing asbestos fibers, you may not know exactly what you are seeing. Some fibers are curly, while others are long and straight. Blue, brown, white, and gray colored fibers are all possible.

According to the Environmental Protection Agency (EPA), you should contact the following officials to report a case of asbestos exposure:

• Asbestos subject matter experts in your state 

• EPA regional office

• Toxic Substances Control Act (TSCA) Assistance Information Service Hotline via mail, email, or phone

• EPA’s Asbestos Ombudsman via phone or fax