Get matched with top sonic cleaning pros in Lexington, MO

You should clean your panels at least twice a year. It depends on your location. In dusty climates (think the Arizona desert), you may need to clean your panels more frequently. Dust can dramatically impact the electrical output. If you live in a climate with extreme weather, you may want to check your panels seasonally.

Walking on the roof to clean gutters is unsafe and not recommended due to significant safety risks. It is especially dangerous on steep or slippery roofs, or if the roof is wet or covered in leaves, which increases the chance of a fall. In addition to personal injury, walking on the roof can damage shingles, potentially leading to water leaks. Instead of walking on the roof, use a sturdy ladder positioned on a stable surface to access the gutters. Be aware that using a ladder also carries risks, as it can be difficult to maintain balance while performing the work. You can also use ground-based cleaning tools. For safety reasons and to prevent damage to your roof, hiring a professional to clean your gutters is the best and safest option.

You should avoid using a pressure washer on any surface or item that could be damaged by the high-pressure spray, as some materials are too delicate to withstand the force.

Key items and surfaces to avoid include:

• Electrical Components: Never pressure wash electrical systems, as water can cause short-circuits and create a safety hazard. This includes utility meters, breaker boxes, electrical outlets, generators, and HVAC or air conditioner units.

• Delicate and Fragile Materials: Fragile items can crack, shatter, or be stripped by the pressure. Avoid pressure washing windows, glass, light fixtures, shingled roofs (especially asphalt), and stucco.

• Painted, Stained, or Sealed Surfaces: Unless your goal is to strip the finish, do not pressure wash painted surfaces, stained wood (like decks), or anything with a protective seal that could be stripped away. Be especially cautious with older surfaces that may contain lead paint.

• Soft Woods and Certain Decking: Delicate surfaces like softwood, composite decking, and antique or wooden patio furniture can be etched or damaged. If you must wash wood, use a lower-powered pressure washer with a wide-angle nozzle to prevent damage.

• Living Things: Never use a pressure washer on people, pets, or plants. The force can cause serious injury and will destroy landscaping.

Moss grows in dark areas of roofs, including in corners and gutters. If left alone, it can grow under roofing and cause permanent damage. Here’s how to remove moss from metal roofs: 

• Soak the moss to soften it

• Scrub it away with a soft-bristled brush, or pick it off with your hands (be sure to wear gloves)

• Use a moss remover that’s compatible with metal roofing, following the manufacturer’s directions

• Remove dead moss and rinse the roof thoroughly

• Prevent future moss growth by trimming branches, cleaning gutters, and attaching zinc strips to moss-prone areas