Best water heater pros near Dittmer, MO

Installing a water heater without a permit can result in high fines—as much as hundreds of dollars per day, in some areas. It can also void your homeowners' insurance and cause problems when selling your home because it violates local building codes and safety regulations.

If your water heater is about to celebrate the big 2-0, you may want to consider sending it off to greener pastures. While the water heater may seem to be working well, any conventional, tanked water heater over 10 years of age is at risk of failure. If your water heater is 20 years or older, your best move is to replace your aging heater before it completely breaks down.

Most standard residential water heaters, which are typically around 40 gallons and use 240 volts and between 3,500 and 5,500 watts, require a 30-amp, two-pole circuit breaker. For smaller, point-of-use water heaters using 120 volts and between 1,500 and 3,000 watts, a 30-amp breaker is also often adequate. However, some models may have different needs; units that use more watts than average may require a 40-amp breaker, while smaller units might only need a 20-amp breaker. Newer, tankless, or more energy-efficient models can also require a higher amperage. Having the correct breaker size is crucial for safe and efficient operation, so it's best to consult a licensed electrician to determine the specific needs of your water heater.

Choosing between an electric water heater vs. a gas water heater comes down to personal preference. Overall, electric heaters are more energy efficient than their gas competitors. They’re also quieter to operate, take up less room, and don’t come with a risk of gas leaks. 

The downside is that electric water heaters cost more to operate than gas. They might also struggle to heat water fast enough for households that use large amounts of hot water. Lastly, a power outage could cause your electric water heater to stop working, whereas gas water heaters may still function.