"Ryan, Miguel, Luis and staff did a great job removing old insulation, inspect, clean & disinfect, spray foam, and blow in new insulation. They were efficient, kept me informed, cleaned up well, and addressed minor issues after the completion was complete. I had planned to also spray foam the basement, but we could not vacate the house (fumes) with a member in hospice. This will be done as soon as we are able. Highly recommended!"
"Full basement finishing. Work included framing, drywall, painting, trim and cabinet install, and floor tiles. He also hung all doors and installed one egress window."
"Raul and his team were very professional and polite. The price was very fair. They did the installation in a timely manner and cleaned up after themselves very well. The crew was friendly and respectful and communicated well. My only concern was that after the insulation was installed, they mudded over the drywall that had been cut, and did not smooth it out at all. The painters who came later were super-annoyed. They had to rent a high-powered sander to get the ceiling to the point where they could prep it for painting. It would have been very easy for the contractor to just scrape the mud flat instead of leaving it to dry with jagged peaks all over. A little more training of the crew would fix this. Or just request it when the crew is there."
"These guys are truly the drywall ninjas! We had a DIY kitchen remodel project we needed completed ASAP to close on a loan, but time was running too close for us to be able do the drywall ourselves. Worse, we needed to be out of town that weekend. I called Noelge at 7 AM on a Friday to see if they were available. By 7:45 AM Dave was at our house for the estimate. He got a crew assembled -- over a holiday weekend, no less -- and the drywall was complete by the time we got home that Monday. We finished the rest of the project ourselves and the loan closed on time. Through the holiday weekend, Noelge stayed in touch with us and kept us up to date on their progress. They were outstanding to work with from start to finish. The next time I have a drywall project, I'm calling Noelge."
"Ed and his crew were awesome to work with. He called back within minutes and we had his bid an hour or two later. After 4 other bids we ultimately went with Ed because he helps his crew on the roof. They do excellent work and the clean-up was great too. Roof was done in two days. Highly recommend Ed."
"We had a little confusion with setting an initial appt through the Angi app, but the team was very thorough during the inspection and provided two options to solve our moisture problem. The team arrived on time, worked very efficiently and were careful to protect our home from dirt or damage. Very responsive and great to work with. Would recommend choosing A&R."
"We needed to replace the siding on our home, had four companies come to our house (three of which were initially found through Angi), and are glad that we used Hoffman Weber to do the job. Their sales associate (Al Lien) was knowledgeable and helpful, but no pressure, which I personally appreciate very much. They had a range of options, and in the end we chose to use HardiPlank which was less expensive than LP at the time of our project. The Hoffman Weber price was very competitive (and significantly lower than the high-pressure company that came out). The installation went well--the crew was hard working and pleasant, and communication with the project manager (Pete) was easy (the installation was done in February, so, weather affected the days of installation). The finished project looks great."
"I think the finishing around the window could've been a little bit nicer. Our basement isn't really finished. It still the brick wall, cement wall.It just seems like it could've been finished off more than it was. They were quick. I didn't see a lot of debris or anything. I know sawing through cement can be messy but they seemed to be very clean and efficient. They were out here pretty quick. We checked around and they were very reasonable."
Plaster can be a difficult DIY to master, especially if you plan to plaster an entire room, rather than patch a small area. Before you begin a plaster DIY project, you need to know which tools and type of plaster to use. It's also important to know how to prepare the surface and apply the plaster for a smooth finish. If that all sounds like a lot of work, you may prefer hiring a local plaster repair contractor to do the job.
Although they have similar applications, spackle and joint compound are not the same. Their primary differences lie in their composition, consistency, and ideal use cases.
Spackle is composed of gypsum and binding agents, making it thicker than joint compound. It dries quickly and is easy to sand, which makes it ideal for small wall repair projects like filling nail holes or patching minor damage.
Joint compound, also known as drywall mud, consists of limestone and gypsum. It is primarily used for large-scale projects, such as taping and finishing the seams on newly installed drywall. It tends to shrink more than spackle and can be more difficult to spread.
While both products can be used to fill small depressions and cracks, spackle cannot replace joint compound for taping and mudding new drywall. Conversely, you can often use joint compound for small patching jobs typically done with spackle.
The age of your home can clue you in to whether you have plaster or drywall ceilings. Homes built after the ‘70s are more likely to have drywall ceilings and walls, while older homes have plaster. You can also do the pushpin test: A pushpin will go into drywall, whereas it’s much harder to push one into a plaster wall. If you’re still unsure, ask a drywall professional to let you know which type of ceilings and walls you have.
While a normal moisture level for drywall is between 5% and 12%, replacement is recommended if you get consistent readings above 17%. At this level, the drywall is likely too compromised by extensive moisture damage to be considered safe. You can replace either the entire sheet or just the affected section. If you are unsure after a visual inspection, it is best to have a contractor or water restoration provider use a professional moisture meter to get an accurate reading.
You can paint over drywall mud about 24 hours after application, but the exact timing depends on factors like humidity, temperature, and the thickness of the mud. For the best results, ensure the mud is completely dry to the touch and has changed from a darker gray to a lighter, chalky white. Don’t forget to sand and prime the drywall surface before you paint to create a smooth, even finish.
The Pine Island, MN homeowners’ guide to drywall insulation services
From average costs to expert advice, get all the answers you need to get your job done.
New insulation can make your home more comfortable and boost energy efficiency. Use this insulation cost guide to get an accurate estimate for the installation.
How much does it cost to insulate a garage? Discover insulation options, prices, and expected and unexpected circumstances that affect the project cost.
Learning how to insulate plaster walls can help improve your home's energy efficiency. However, there are crucial cautions to consider before attempting.
Thick gaps and extra joint compound can alter the look of drywall. So, should drywall be butt up against a wall? Review this guide for seamless installation.
