Get matched with top dishwasher installation pros in Grant, MN

If your dishwasher isn’t draining, some common causes include a clogged drain filter, drain hose, or air gap. Also, if you have a garbage disposal, a clog in the disposal can back up your dishwasher since they share plumbing, as can a clog in your kitchen sink’s plumbing. A handy DIYer may be able to figure out how to unclog a dishwasher, but you may need to call in a plumber if you can’t locate and clear the clog yourself.

The cost to repair a dishwasher is $200 on average, with the typical price ranging from $160 to $300. However, if you need a more specialized repair, that total could reach $600. The main cost factor is the price of the replacement part, but the dishwasher’s make, model, and year can also impact the price. 

For a simple repair, such as a filter replacement, you can comfortably budget to spend between $50 to $100. But for something more complex like a repair on the dishwasher’s motor, you might see a bill totaling $400 to $600.

To get rid of standing water in your dishwasher, first try activating the drain mechanism by pressing and holding the cancel button for at least three seconds. If that doesn’t work, you’ll need to do some troubleshooting to drain the standing water from the dishwasher. This will involve shutting off the power, then scooping out the water, cleaning the drain filter, and clearing the air gap. You’ll also want to run the garbage disposal and check the drain hose for clogs.

Any drain in your house requires a water trap to prevent sewer gases from entering the home. Dishwashers don’t have an internal water trap, so they must use an external P trap. The most convenient P trap for the dishwasher is already in the plumbing under your sink.