Get matched with top fireplace pros in Fosston, MN

Modern gas fireplaces are relatively efficient and don't burn excessive amounts of gas, especially compared to older models. A gas fireplace might use between 10,000 to 40,000 BTUs per hour; the total amount of gas used depends on the fireplace's size, heat output, and how often it's in use. To help keep your running costs down, consider using a thermostat and turning off the fireplace when not needed to minimize gas consumption

The National Fire Protection Association (NFPA) says that chimneys and their associated elements like fireplaces, vents, or stoves should be cleaned at least once a year before the start of seasonal use. According to the Chimney Safety Institute of America, a chimney should be cleaned when there is 1/8 inch of soot buildup. If there’s more than that, creosote—a flammable byproduct of burning wood—can form and increase the risk of a chimney fire.

A hot fire alone will not remove significant creosote buildup and can be dangerous, as it risks causing a chimney fire. While the warmth from a fire can help loosen stuck tar, making treatments like creosote logs more effective, it is not a substitute for proper cleaning. For existing creosote, the safest and most effective method is to have your chimney professionally cleaned by a chimney sweep.

The best location for a wood stove depends on your home's layout and venting options. For optimal heat distribution, a central location on the ground floor, such as the living room, is often recommended. If you have an existing, functional chimney, installing the stove there can simplify the venting process. Alternatively, placing the stove near an outside wall can make it easier to route a new chimney through the roof. For safety, ensure no combustible materials are near the stove. Building codes typically require 20 to 36 inches of clearance between the stove and any side walls.