Get matched with top generator install pros in Eden Valley, MN

Setting up utilities on a vacant property usually takes at least a few months, or between 6 weeks to 16 weeks. This process requires working with the local planning and zoning department, hiring a building contractor or engineer to design the utility layout, securing permits, laying the lines, and connecting the utilities.

As long as they have enough fuel, whole-house generators can run for weeks at a time (400 to 500 hours) without suffering too much wear and tear. However, this type of extensive use isn’t ideal if you want to extend the life of your generator.

Two important points. First, some generators may need you to periodically check oil levels every day or so and refill as necessary for safe operation. Second, if your generator uses a fuel tank, keep it regularly full so it doesn’t suddenly shut off. Many backup generators can run through a full tank in a day when they are powering large portions of a home.

While diesel is relatively stable, it won’t last nearly as long as propane and you may have to replace it if it sits unused for too long. Diesel can sometimes struggle to work efficiently or start engines during especially cold weather, so it’s not the best choice for every climate. Compared to fuels like propane and natural gas, diesel generators tend to be noisier and create more exhaust, which isn’t always ideal for home use.

Generator size requirements vary wildly among properties, but typical generator sizes are listed below based on home square footage:

• 1,000 sq ft: 6–9 kW

• 1,500 sq ft: 7–10 kW

• 2,000 sq ft: 10–14kW

• 2,500 sq ft: 12–16kW

• 3,000 sq ft: 16–20kW+

Unfortunately, home square footage isn’t always a good indicator of generator size requirements. Instead, you should call in a professional to discuss which items in your home you’d like to run via your generator. They can calculate peak and average consumption for those items and then size your generator appropriately for optimal performance.