Get matched with top fencing pros in Wellston, MI

While power washing isn't a requirement before you stain a fence, it can make the job much easier and faster while reducing manual labor requirements. The stain will not work if the wood is full of dirt and dust, so power washing, sometimes called pressure washing, is a fast and effective way to prepare the wood for staining. Remember that you need to stain or repaint relatively soon after the wood has dried so that there isn’t time for dust and dirt to build up again. 

The average lifespan of a wood fence is 15 to 20 years, but some can last for 40 years or more depending on several factors. The type of wood is crucial; for example, untreated pine may only last 5 to 10 years, while pressure-treated pine can last up to 20 years, and cedar's natural resistance can extend its life to 40 years. Other factors include local weather conditions, with wet and windy climates causing faster deterioration, and the quality of maintenance. Higher-end wood, metal posts, and privacy fence styles also tend to last longer.

While they can be closer, the maximum distance between fence posts for residential fences is 8 feet. This ensures the panels are adequately supported by the fence posts. This is usually dictated by the width of the panel, which is typically between 5 and 8 feet. While narrower panels will require more posts, they’ll be lighter and easier to work with than wider panels that are the same height.

In most cases, you will need a building permit to put up a vinyl fence, especially if the fence is sitting on or close to your property line. You can ask your local building department or  fence installation company if your fence project will require a permit. If so, you can expect it to cost between $20 and $60. Your fence installer should pull the permit for you. Building without a permit could eventually require you to pay again to remove the fence and reinstall it after getting the job approved.