Top-rated deck maintenance specialists.

Get matched with top deck maintenance specialists in Unionville, MI

Enter your zip and get matched with up to 5 pros

Need a pro for your deck maintenance project in Unionville, MI?

Select your specific project to find the pro for you.

Find Deck maintenance specialists in Unionville

Avatar for Elysium Painting Company
Elysium Painting Company
4.2(
184
)
Deck, Fence, Patio or Porch - Clean and SealDeck, Fence, Patio or Porch - Clean and Seal - For Business

Serving Unionville, MI and surrounding areas

In business since 2004

Free estimates

Credit card accepted

"They helped us decide on the type of paint finish, and were very patient as we tried a couple of shades of paint and helped us with every aspect of doing an entire exterior paint job.  It was an absolutely huge job and they really exceeded our expectations.  They painted everything including all the trim, cedar shake, gutters and railings and ceilings on our large, wrap around covered, two-story porch and deck.  They even cut down a tree for us that was in the way of the painting that we had wanted to take out! 



The project manager, Kevin, was here everyday checking on progress, talking to us.  All the workers were so nice and very careful with everything and respectful of our home.  It was a great experience and the house looks brand new and just beautiful.  Would recommend the entire crew to anyone.  Very, very thorough.
"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+5

Recommended by82%of homeowners
Showing 1-10 of 34
Deck Maintenance questions, answered by experts

The overhang, or nosing, of deck steps is another area that will be covered in building code requirements. The noses on your deck steps should have a minimum overhang of ¾ inch. For safety, usability, and code compliance, the nosing of deck steps should not extend past 1¼ inches.

The best way to sand a deck is by cleaning it, sanding the boards and stairs with 60- or 80-grit sandpaper, and sanding the railings and posts with 80-grit sandpaper. You should sand in the direction of the wood grain to avoid damaging the timber. When sanding your deck, use medium pressure and aim for an even sand. Pressing too hard with a sander can damage decks, as most are softwoods.

Yes, you can build a deck over your outdoor HVAC unit, but you need to leave at least 5 feet of vertical clearance above the unit. If you don’t want your deck to be that high off the ground, you could build a floating deck in another part of your yard—again, as long as you leave at least 4 feet of horizontal space between the deck and your AC unit.

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

Local building codes don’t specify the number of steps a deck can have before a railing is required, mainly because stair height varies widely. Most areas require decks 30 inches or higher to have a railing. While not exact, that roughly equates to four to seven steps.

The Unionville, MI homeowners’ guide to deck maintenance services

From average costs to expert advice, get all the answers you need to get your job done.