Get matched with top couch cleaners in Maple Rapids, MI

Don’t run your AC with a wet filter. It can cause your AC to work too hard, which will run up your utility bill and cause extra wear and tear on the system. You could also spread moisture and mold throughout your house. Turn off the AC, remove the wet filter, and check for cracks or clogs. Fix the problem (with a pro’s help, if you need it), and put a dry filter in place before you turn the system back on.

While caulking is handy for quite a bit of jobs, it’s still limited. Any crack or gap larger than 1/4 inch is best left for a more intensive repair job. When you hire house painters, they should run a thorough check to see what they need to repair before they start the job.

Large repairs that caulking typically won’t do well with include cracks or holes larger than a 1/4 inch, rotted wood, or metal surfaces, such as garage doors.

Yes, a dirty air filter can cause a higher electric bill. That’s because clogged filters make it harder for air to flow through your HVAC system, which forces it to work harder and use more energy. According to the U.S. Department of Energy, replacing dirty filters can save you between 5% and 15% in utility costs.

Most HVAC service calls include diagnostic fees, which could include checking on a specific issue you’re experiencing or running through a routine inspection checklist. If you called for a particular problem, the service call will also include an estimate to fix the issue, including materials and labor. Depending on your HVAC technician and the service you requested, you might also get a general inspection of your system components to ensure everything is working as intended.