Get matched with top garage pros in Evart, MI

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.

If your garage door seems to freeze every winter, you can try rubbing silicone spray or petroleum jelly around the edges and rollers of the garage door. However, it’s a good idea to avoid direct application of silicone sprays like WD40 to rubber edges, which could damage them over time. A garage door that frequently freezes shut could need a full replacement, especially if it’s showing signs of rust or other wear and tear.

It is possible for a car to interfere with a garage door opener, but the interference will most likely be caused by any onboard electronics in this scenario. If you encounter this problem, try parking a safe distance away from the garage door and turn off the car’s electronic equipment.

You’ll usually need to prime a garage floor before painting—especially if the floor is unpainted. Garage floors are made from concrete, which is porous and produces dust. The dust can contaminate the paint and cause issues with adherence. 

Primer creates a barrier and gives you a clean surface to work on. It also minimizes absorption to help give you an even, pro-looking paint job. Make sure you choose a primer that’s specifically designed to cover concrete flooring.