Get matched with top roofers in Drayton Plains, MI

If you’re choosing between a roof overlay and a tear-off, opt for a tear-off and full roof replacement instead of a roof overlay if possible. The cost savings from an overlay can easily be eclipsed by repair costs, the effects of structural damage from the additional weight, and needing to replace your roof sooner than expected. A full replacement will last longer and is less likely to need damage repaired over time.

Though cedar shakes often get confused with shingles, there are a few key differences between wood shakes and wood shingles. For one, cedar shingle prices are lower, although shingles are less durable than wood shakes. Cedar shakes are thicker than shingles (shingles range from about 3/8 to 1/2 inches thick, compared to 1/2 to 3/4 inches thick for shakes). Wood shakes are handmade, while shingles are usually machine-made. Also, wood shakes work better on steeper roofs than shingles do. While the cost of cedar shingles is more budget-friendly, there are many great reasons to choose shakes.

During the framing process, builders connect the roof to the walls with materials, including metal connectors, plywood panels, and wood blocks. These roof-to-wall connections are important and provide weatherproofing, noise and temperature insulation, protection against pests, and home integrity. The type of connector and method used will vary, depending on your home’s construction and needs, and each has pros and cons in terms of cost, noise insulation, longevity, and reliability. Talk with your home or roofing contractor about the best connectors for your roof and walls, and what they recommend for your home.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.