Get matched with top fencing pros in Oakland, ME

A silt fence should be buried in a trench that is 6 to 12 inches deep. A depth of at least 6 to 8 inches is necessary to prevent water and sediment from running underneath the fence. A deeper trench, up to 12 inches, provides better anchoring during wet and windy weather. To ensure proper installation, look for a red line on the silt fence fabric, which often indicates the correct burial depth. Always adhere to local guidelines and regulations; a professional contractor will be familiar with these requirements.

A well-maintained pipe fence can last anywhere from 20 to 50 years, depending on factors like material, climate, and maintenance. Galvanized or coated pipes resist rust and corrosion better than other alternatives, so they tend to last longer, especially in humid or wet environments. Routine maintenance, such as inspecting for damage, removing rust, and applying protective coatings, helps extend the fence’s lifespan significantly.

If you’re looking for a budget-friendly fence material, corrugated metal could be the answer. Metal fences cost about $7 to $32 per foot. Aluminum corrugated metal tends to be less expensive than steel. Both options are similar in cost to wood, so, depending on the type of wood you are considering, corrugated metal could be better for your budget.

A gate shouldn’t be higher or lower than the fence it's attached to. If the gate is lower than the fence, it encourages strangers to peek at your property. If the gate is higher than the fence, it just looks weird. Gates allow for increased security and aesthetics, so ensure the gate rests at the same height as the fence.