Wattle fences are typically around 4 feet tall, but they can be built taller or shorter depending on their intended use. Taller fences may require additional reinforcements, such as thicker posts or tighter weaving, to ensure the fence’s stability and durability against wind and other elements.

Whether you need a permit to build or install a fence depends on several factors, including your location, the fence's height, its placement in your yard, and the materials used. In many cities and highly populated areas, a permit is required, especially for fences taller than 6 feet. Conversely, rural areas may have fewer restrictions. Typically, backyard privacy fences 6 feet or shorter do not require a permit, while front yard fences often have a lower height limit, sometimes as low as 3.5 feet. There can also be exceptions for properties in mixed residential-commercial zones. It's best to check with your local building inspection or zoning department to understand the specific requirements, height restrictions, and location rules for your area. A professional fence installer can help you navigate this process and often secure the necessary permits for you, though this may extend the project timeline.

If you’re part of a homeowners association (HOA), you’ll need to speak with them regarding your fence repairs prior to starting work. Sometimes, you’ll need HOA approval to start repairs and ensure that the completed project meets their standards. In other cases, direct approval might not be required to start the project. Speaking with your HOA first will help avoid any unnecessary fines and headaches.

The average cost to install a fence is between $1,800 and $4,500. However, the price can vary significantly based on several factors. For a small DIY project, costs could be as low as $450, while fencing a large property like a 5-acre yard can exceed $43,000. Key factors that influence the total cost include the fence's size and height, the material used, the complexity of the design, site preparation needs, and any additional features like gates. The cost of raw materials, manufacturing, and custom fabrication can also impact the final price.