Top-rated deck staining pros.

Get matched with top deck staining pros in Millinocket, ME

Enter your zip and get matched with up to 5 pros

Need a pro for your deck staining project in Millinocket, ME?

Select your specific project to find the pro for you.

Find Deck staining pros in Millinocket

Avatar for Aqua Terra Blasting
Aqua Terra Blasting
5.0(
7
)

Serving Millinocket, ME and surrounding areas

In business since 2017

Free estimates

Emergency services offered

"Andy did an outstanding of stripping 150 years of paint off the Marshall Point Light in Port Clyde, Maine. The metal was taken down to bright with all paint and extensive rust being removed. This was coordinated with the painters who primed it as soon as it dried. All residue was caught and collected in tarps for proper disposal. No dust was produced. The brickworks and granite blocks were also cleaned down to original surface for priming and recoating. The job was completed timely despite inclement weather. I highly recommend Andy and Aqua Terra for any such project."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+14

Recommended by100%of homeowners
Avatar for New England Home Renovations LLC
New England Home Renovations LLC
4.0(
311
)

Serving Millinocket, ME and surrounding areas

In business since 1983

Free estimates

Emergency services offered

"Everything went wonderfully with this company.  They were very professional, listened to exactly what my problem was, and explained to me how they were going to diagnose the problem and/or solve it before doing any actual work.  Once they started, the team (three people came) worked together like a well-oiled machine.  One was in the room with diagnostics, one was at the fuse box looking for possible problems there, and the third went into the crawlspace beneath our house to look at the physical wiring.  Once the problem was found (there was a faulty wire beneath the house that had come loose from the junction box), it was fixed and tested within minutes and another full diagnostic was done to make sure there were no other possible issues.  They cleaned up after themselves very neatly.  They also replaced the light switch with a dimmer switch at no extra cost!  Well within my budget, and came in even lower than their original (FREE) estimate!  I would highly recommend this company to anyone in the Bergen County area.
"
Before
After's
New boiler install
Removal of cast Iron to PVC.
Additional Photos

+37

Recommended by89%of homeowners
Avatar for Welcome Home Moving Services
Welcome Home Moving Services
5.0(
7
)

Serving Millinocket, ME and surrounding areas

In business since 2020

Free estimates

Credit card accepted

"They were excellent, I would highly recommend. Everyone was very professional and showed up right when they said they would. They were gentle and everything arrived intact. They had us on the road in no time."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+1

Recommended by100%of homeowners
Avatar for Scesny Roofing
Scesny Roofing
3.8(
18
)

Serving Millinocket, ME and surrounding areas

In business since 2004

Free estimates

Emergency services offered

"I had been looking to replace a leaky metal roof on an old barn my wife
had converted to use as her art studio.  The existing roof was an
exposed  fastener, reversed box rib pattern.  The roof support was open
purlins on 2x6 rafters spaced 24 inches on center.  We liked and wanted to
retain the metal roof feature of the building.
Almost all the roofers I talked to wanted to install a standing seam or
similar concealed fastener roof, which, in addition to being way more
expensive, would have required installation of a solid deck, likely
exceeding the design capacity of the existing rafters.  Few were
experienced and familiar with the type of roof we wanted.
Of the three estimates for an exposed fastener roof I was able to get,
Chris' was the most reasonable.  In addition, he was prompt in getting
out to look at the property and give an estimate, and personable and
professional in demeanor.  He did the job exactly when he said he would,
and the materials and workmanship were excellent.  Communicating with
him throughout the project was easy.
In summary, this was an outstanding experience with a professional and
knowledgeable contractor.  I would not hesitate to call on his services
again, or to recommend him to others.
"
Additional Photos
Additional Photos
Additional Photos
Recommended by81%of homeowners
Showing 1-10 of 30
Deck Staining questions, answered by experts

Staining or sealing a cedar deck or fence is highly recommended to extend its lifespan and protect it from the elements. While cedar is naturally resistant to mold and mildew, it is not impervious to damage from moisture, sun exposure, splintering, fading, and rot over time. Applying a protective finish creates a shield that preserves the wood's strength and appearance, potentially extending its life by five to 10 years.

When choosing a finish, it's helpful to understand the difference between a sealer and a stain. A sealer sits on top of the wood, whereas a combination stain and sealer soaks into the top layer. Because it penetrates the wood, a stain generally offers better protection against UV damage and rot and lasts significantly longer. For the best results that also preserve the wood's natural color, consider using a near-translucent stain.

To maintain protection, plan on reapplying the stain or sealer every two to three years, either as a DIY project or by hiring a professional.

It is definitely worth sanding a deck to ensure the wood absorbs new stain. Sanding a deck removes the outer layers of aging wood, allowing the stain to penetrate. It also gives a fresh look to the entire surface as part of the deck refinishing process. Without sanding, your stain or sealant is less likely to absorb into the wood. While sanding a deck is a time-intensive project, the rewards are noticeable and long-lasting.

Staining a deck with a rag is typically a better option than using a brush, as it helps the stain penetrate deeper into the wood. However, both brushes and rags are best reserved for detailed work because using these tools on an entire deck can require tediously crawling around on your hands and knees. A pad applicator, sprayer, or roller are preferred alternatives to applying stain over the majority of a deck. Use a rag for railings and other detailed work, and let the wood soak up as much of the stain as possible before wiping away drips or pools.

Generally, these steps are included in exterior house painting:

  • Prepping and protecting the areas not being painted

  • Scraping away loose paint

  • Cleaning off dirt, grease, and debris

  • Caulking gaps and openings

  • Priming with a quality paint primer

  • Painting the prepared areas, including trim and accents with chosen paint finish

  • Adding a second coat

  • Cleaning up the site and disposing of tape, plastic, and drop cloths

You don’t necessarily have to remove all the old paint before repainting your deck, but it’s best to remove as much as possible to ensure a smooth and long-lasting finish. Prioritize scraping off loose, peeling, or flaking paint, and sand down rough areas to create a smooth surface for the new paint to bond with.

The Millinocket, ME homeowners’ guide to deck staining services

From average costs to expert advice, get all the answers you need to get your job done.

What do you need done? We’ll find top pros.
  • 🌱 "Mow a small front yard"
  • 🛠 "Fix a leaking pipe under the sink"
  • 🏠 "Repair shingles on an asphalt roof"