Top-rated deck staining pros.

Get matched with top deck staining pros in Greenville, ME

Enter your zip and get matched with up to 5 pros

Need a pro for your deck staining project in Greenville, ME?

Select your specific project to find the pro for you.

Find Deck staining pros in Greenville

Avatar for New England Home Renovations LLC
New England Home Renovations LLC
4.0(
311
)
Exterior Home or Structure - Paint or StainExterior Home or Structure - Paint or Stain: LargeExterior Home or Structure - Paint or Stain: Medium

Serving Greenville, ME and surrounding areas

In business since 1983

Free estimates

Emergency services offered

"Everything went wonderfully with this company.  They were very professional, listened to exactly what my problem was, and explained to me how they were going to diagnose the problem and/or solve it before doing any actual work.  Once they started, the team (three people came) worked together like a well-oiled machine.  One was in the room with diagnostics, one was at the fuse box looking for possible problems there, and the third went into the crawlspace beneath our house to look at the physical wiring.  Once the problem was found (there was a faulty wire beneath the house that had come loose from the junction box), it was fixed and tested within minutes and another full diagnostic was done to make sure there were no other possible issues.  They cleaned up after themselves very neatly.  They also replaced the light switch with a dimmer switch at no extra cost!  Well within my budget, and came in even lower than their original (FREE) estimate!  I would highly recommend this company to anyone in the Bergen County area.
"
Before
After's
New boiler install
Removal of cast Iron to PVC.
Additional Photos

+37

Recommended by89%of homeowners
Avatar for Scesny Roofing
Scesny Roofing
3.8(
18
)
Exterior Home or Structure - Paint or StainExterior Home or Structure - Paint or Stain: LargeExterior Home or Structure - Paint or Stain: Medium

Serving Greenville, ME and surrounding areas

In business since 2004

Free estimates

Emergency services offered

"I had been looking to replace a leaky metal roof on an old barn my wife
had converted to use as her art studio.  The existing roof was an
exposed  fastener, reversed box rib pattern.  The roof support was open
purlins on 2x6 rafters spaced 24 inches on center.  We liked and wanted to
retain the metal roof feature of the building.
Almost all the roofers I talked to wanted to install a standing seam or
similar concealed fastener roof, which, in addition to being way more
expensive, would have required installation of a solid deck, likely
exceeding the design capacity of the existing rafters.  Few were
experienced and familiar with the type of roof we wanted.
Of the three estimates for an exposed fastener roof I was able to get,
Chris' was the most reasonable.  In addition, he was prompt in getting
out to look at the property and give an estimate, and personable and
professional in demeanor.  He did the job exactly when he said he would,
and the materials and workmanship were excellent.  Communicating with
him throughout the project was easy.
In summary, this was an outstanding experience with a professional and
knowledgeable contractor.  I would not hesitate to call on his services
again, or to recommend him to others.
"
Additional Photos
Additional Photos
Additional Photos
Recommended by81%of homeowners
Showing 1-10 of 24
Deck Staining questions, answered by experts

Staining a deck with a rag is typically a better option than using a brush, as it helps the stain penetrate deeper into the wood. However, both brushes and rags are best reserved for detailed work because using these tools on an entire deck can require tediously crawling around on your hands and knees. A pad applicator, sprayer, or roller are preferred alternatives to applying stain over the majority of a deck. Use a rag for railings and other detailed work, and let the wood soak up as much of the stain as possible before wiping away drips or pools.

When staining a deck, don’t skip surface prep, avoid staining damp or dirty boards, and don’t apply stain in extreme heat, cold, or wet conditions. Never overload the wood with a stain, as too much can cause tackiness or peeling. Also, don’t forget to test a small area first to ensure the color and finish look right.

No, you don't need to stain Ipe decking, although you can if you want to change the color. You will, however, need to apply a UV coating if you don't want the natural color to fade. Speak to a deck staining specialist near you to discuss the best options if you want to stain your decking. And remember that you’ll need to seal your Ipe wood deck annually to protect it from scratches and Mother Nature.

Pressure-treated wood lasts at least 10 years, but with the right care and treatment, it can last as long as 40 years. Painting the boards is one way to increase the lifespan of pressure-treated wood. The layer of paint provides extra protection for the wood against the exterior elements and insects.

Whether to paint or stain a deck depends on your personal preference for appearance and budget. Stain provides a natural look with a range of undertones, is typically less expensive, and may only require one coat, but it does not last as long as paint. Paint offers a sleeker finish with a virtually unlimited color palette. Both options will protect your deck from outdoor elements like rain, snow, and general wear and tear.

The Greenville, ME homeowners’ guide to deck staining services

From average costs to expert advice, get all the answers you need to get your job done.