Top-rated deck staining pros.

Get matched with top deck staining pros in Medway, ME

Enter your zip and get matched with up to 5 pros

Need a pro for your deck staining project in Medway, ME?

Select your specific project to find the pro for you.

Find Deck staining pros in Medway

Avatar for New England Home Renovations LLC
New England Home Renovations LLC
4.0(
311
)
Exterior Home or Structure - Paint or StainExterior Home or Structure - Paint or Stain: LargeExterior Home or Structure - Paint or Stain: Medium

Serving Medway, ME and surrounding areas

In business since 1983

Free estimates

Emergency services offered

"Everything went wonderfully with this company.  They were very professional, listened to exactly what my problem was, and explained to me how they were going to diagnose the problem and/or solve it before doing any actual work.  Once they started, the team (three people came) worked together like a well-oiled machine.  One was in the room with diagnostics, one was at the fuse box looking for possible problems there, and the third went into the crawlspace beneath our house to look at the physical wiring.  Once the problem was found (there was a faulty wire beneath the house that had come loose from the junction box), it was fixed and tested within minutes and another full diagnostic was done to make sure there were no other possible issues.  They cleaned up after themselves very neatly.  They also replaced the light switch with a dimmer switch at no extra cost!  Well within my budget, and came in even lower than their original (FREE) estimate!  I would highly recommend this company to anyone in the Bergen County area.
"
Before
After's
New boiler install
Removal of cast Iron to PVC.
Additional Photos

+37

Recommended by89%of homeowners
Avatar for Scesny Roofing
Scesny Roofing
3.8(
18
)
Exterior Home or Structure - Paint or StainExterior Home or Structure - Paint or Stain: LargeExterior Home or Structure - Paint or Stain: Medium

Serving Medway, ME and surrounding areas

In business since 2004

Free estimates

Emergency services offered

"I had been looking to replace a leaky metal roof on an old barn my wife
had converted to use as her art studio.  The existing roof was an
exposed  fastener, reversed box rib pattern.  The roof support was open
purlins on 2x6 rafters spaced 24 inches on center.  We liked and wanted to
retain the metal roof feature of the building.
Almost all the roofers I talked to wanted to install a standing seam or
similar concealed fastener roof, which, in addition to being way more
expensive, would have required installation of a solid deck, likely
exceeding the design capacity of the existing rafters.  Few were
experienced and familiar with the type of roof we wanted.
Of the three estimates for an exposed fastener roof I was able to get,
Chris' was the most reasonable.  In addition, he was prompt in getting
out to look at the property and give an estimate, and personable and
professional in demeanor.  He did the job exactly when he said he would,
and the materials and workmanship were excellent.  Communicating with
him throughout the project was easy.
In summary, this was an outstanding experience with a professional and
knowledgeable contractor.  I would not hesitate to call on his services
again, or to recommend him to others.
"
Additional Photos
Additional Photos
Additional Photos
Recommended by81%of homeowners
Showing 1-10 of 23
Deck Staining questions, answered by experts

In most cases, sanding an old deck before staining it is necessary to achieve a decent finish. If your old deck has a relatively new stain finish on it and you're only doing touch-ups, you can generally skip the sanding part. However, if your goal is to make the deck look and function better, sanding first is a must. 

Yes, it is important to wash your deck before painting to ensure the paint applies well and adheres properly. While you don't have to use a pressure washer, it is one of the most efficient cleaning methods. Pressure washing can quickly remove dirt, wood fibers, and flaked paint, getting deeper into the wood than manual scrubbing. You can also clean the deck with a stiff broom and a cleaning solution. Regardless of the method, a clean surface is essential for good paint adhesion. Make sure the deck is completely dry before applying any paint.

The number of coats you need to apply when whitewashing a surface depends on how opaque you want the final product to be. If you're going for a transparent, barely there look, a single coat or two may suffice. For fuller coverage, you'll want to use multiple coats. Another option is to use a less diluted paint to get a thicker coverage. 

Stain is meant to be absorbed by the porous wood, allowing some of the natural grain to show through. With that in mind, you don’t want to add more stain than the wood can absorb, as you risk covering up its natural markings. Generally, two coats is the maximum you should do, although very dense hardwoods may only be able to take a single coat.

When applying multiple coats, wait four to six hours for each coat to dry. Not waiting long enough can result in streaks, peeling, and uneven color. Plus, it will be more difficult to discern where the second coat has already been applied.

The Medway, ME homeowners’ guide to deck staining services

From average costs to expert advice, get all the answers you need to get your job done.