Top-rated deck staining pros.

Get matched with top deck staining pros in East Millinocket, ME

Enter your zip and get matched with up to 5 pros

Need a pro for your deck staining project in East Millinocket, ME?

Select your specific project to find the pro for you.

Find Deck staining pros in East Millinocket

Avatar for New England Home Renovations LLC
New England Home Renovations LLC
4.0(
311
)
Exterior Home or Structure - Paint or StainExterior Home or Structure - Paint or Stain: LargeExterior Home or Structure - Paint or Stain: Medium

Serving East Millinocket, ME and surrounding areas

In business since 1983

Free estimates

Emergency services offered

"Everything went wonderfully with this company.  They were very professional, listened to exactly what my problem was, and explained to me how they were going to diagnose the problem and/or solve it before doing any actual work.  Once they started, the team (three people came) worked together like a well-oiled machine.  One was in the room with diagnostics, one was at the fuse box looking for possible problems there, and the third went into the crawlspace beneath our house to look at the physical wiring.  Once the problem was found (there was a faulty wire beneath the house that had come loose from the junction box), it was fixed and tested within minutes and another full diagnostic was done to make sure there were no other possible issues.  They cleaned up after themselves very neatly.  They also replaced the light switch with a dimmer switch at no extra cost!  Well within my budget, and came in even lower than their original (FREE) estimate!  I would highly recommend this company to anyone in the Bergen County area.
"
Before
After's
New boiler install
Removal of cast Iron to PVC.
Additional Photos

+37

Recommended by89%of homeowners
Avatar for Scesny Roofing
Scesny Roofing
3.8(
18
)
Exterior Home or Structure - Paint or StainExterior Home or Structure - Paint or Stain: LargeExterior Home or Structure - Paint or Stain: Medium

Serving East Millinocket, ME and surrounding areas

In business since 2004

Free estimates

Emergency services offered

"I had been looking to replace a leaky metal roof on an old barn my wife
had converted to use as her art studio.  The existing roof was an
exposed  fastener, reversed box rib pattern.  The roof support was open
purlins on 2x6 rafters spaced 24 inches on center.  We liked and wanted to
retain the metal roof feature of the building.
Almost all the roofers I talked to wanted to install a standing seam or
similar concealed fastener roof, which, in addition to being way more
expensive, would have required installation of a solid deck, likely
exceeding the design capacity of the existing rafters.  Few were
experienced and familiar with the type of roof we wanted.
Of the three estimates for an exposed fastener roof I was able to get,
Chris' was the most reasonable.  In addition, he was prompt in getting
out to look at the property and give an estimate, and personable and
professional in demeanor.  He did the job exactly when he said he would,
and the materials and workmanship were excellent.  Communicating with
him throughout the project was easy.
In summary, this was an outstanding experience with a professional and
knowledgeable contractor.  I would not hesitate to call on his services
again, or to recommend him to others.
"
Additional Photos
Additional Photos
Additional Photos
Recommended by81%of homeowners
Showing 1-10 of 22
Deck Staining questions, answered by experts

Whether to brush or roll stain on wood depends on the project and your preference. Brushing is ideal for smaller, intricate areas and offers more control over the application, ensuring thorough coverage and penetration into the wood's grain. 

Conversely, rolling is efficient for more extensive, flat surfaces and can save time. However, it is not always the best fit for textured or uneven wood. Some projects may benefit from combining both methods, using a brush for detail work and a roller for broader areas. Ultimately, the choice between brushing and rolling depends on the specific requirements of your staining project.

Stains penetrate wood best when it's cool and dry, so you want to avoid moisture. If the wood is wet upon application, or if it rains before the stain dries, the water will soak into the wood and displace the staining solution. This leads to a flaky and blotchy look, which is the opposite of a sumptuous even coat. Once the stain has fully cured, after about 3 days, rain shouldn’t cause you any problems.

You may be wondering: can you paint cement? Fortunately, the answer is yes.

To change the color of your cinder blocks, you have two options. You can either paint them or stain them. Either way, you'll be able to choose from a wide range of color options. Some popular colors for cinder block painting include off-white shades and gray tones, which add a modern spin to the traditional gray blocks.

Wood stains last anywhere from two to five years, depending on exposure to the elements, your local climate, the type of stain, and the surface it’s on. For instance, vertical surfaces last longer than horizontal surfaces. Some types of woods, like dense hardwoods, will require a recoat yearly, as they are too dense for the stain to absorb. In any event, apply a recoat every 2 to 4 years. As for storage, a can of unopened stain can last up to 5 years, though results may vary.

Painting a damaged pool deck is not recommended if the substrate is crumbling, cracking, spalling, or otherwise actively deteriorating. Continuing deterioration will result in the paint also delaminating or flaking off the damaged surface. Minor damage such as chips or hairline cracks that are not actively deteriorating can often be repaired enough to paint over. A damaged pool deck with a lot of cracking and deterioration should be replaced for best results.

The East Millinocket, ME homeowners’ guide to deck staining services

From average costs to expert advice, get all the answers you need to get your job done.