Top-rated deck staining pros.

Get matched with top deck staining pros in Patten, ME

Enter your zip and get matched with up to 5 pros

Need a pro for your deck staining project in Patten, ME?

Select your specific project to find the pro for you.

Find Deck staining pros in Patten

Avatar for Aqua Terra Blasting
Aqua Terra Blasting
5.0(
7
)
Exterior Home or Structure - Paint or StainExterior Home or Structure - Paint or Stain: LargeExterior Home or Structure - Paint or Stain: Medium

Serving Patten, ME and surrounding areas

In business since 2017

Free estimates

Emergency services offered

"Andy did an outstanding of stripping 150 years of paint off the Marshall Point Light in Port Clyde, Maine. The metal was taken down to bright with all paint and extensive rust being removed. This was coordinated with the painters who primed it as soon as it dried. All residue was caught and collected in tarps for proper disposal. No dust was produced. The brickworks and granite blocks were also cleaned down to original surface for priming and recoating. The job was completed timely despite inclement weather. I highly recommend Andy and Aqua Terra for any such project."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+14

Recommended by100%of homeowners
Avatar for New England Home Renovations LLC
New England Home Renovations LLC
4.0(
311
)
Exterior Home or Structure - Paint or StainExterior Home or Structure - Paint or Stain: LargeExterior Home or Structure - Paint or Stain: Medium

Serving Patten, ME and surrounding areas

In business since 1983

Free estimates

Emergency services offered

"Everything went wonderfully with this company.  They were very professional, listened to exactly what my problem was, and explained to me how they were going to diagnose the problem and/or solve it before doing any actual work.  Once they started, the team (three people came) worked together like a well-oiled machine.  One was in the room with diagnostics, one was at the fuse box looking for possible problems there, and the third went into the crawlspace beneath our house to look at the physical wiring.  Once the problem was found (there was a faulty wire beneath the house that had come loose from the junction box), it was fixed and tested within minutes and another full diagnostic was done to make sure there were no other possible issues.  They cleaned up after themselves very neatly.  They also replaced the light switch with a dimmer switch at no extra cost!  Well within my budget, and came in even lower than their original (FREE) estimate!  I would highly recommend this company to anyone in the Bergen County area.
"
Before
After's
New boiler install
Removal of cast Iron to PVC.
Additional Photos

+37

Recommended by89%of homeowners
Avatar for Scesny Roofing
Scesny Roofing
3.8(
18
)
Exterior Home or Structure - Paint or StainExterior Home or Structure - Paint or Stain: LargeExterior Home or Structure - Paint or Stain: Medium

Serving Patten, ME and surrounding areas

In business since 2004

Free estimates

Emergency services offered

"I had been looking to replace a leaky metal roof on an old barn my wife
had converted to use as her art studio.  The existing roof was an
exposed  fastener, reversed box rib pattern.  The roof support was open
purlins on 2x6 rafters spaced 24 inches on center.  We liked and wanted to
retain the metal roof feature of the building.
Almost all the roofers I talked to wanted to install a standing seam or
similar concealed fastener roof, which, in addition to being way more
expensive, would have required installation of a solid deck, likely
exceeding the design capacity of the existing rafters.  Few were
experienced and familiar with the type of roof we wanted.
Of the three estimates for an exposed fastener roof I was able to get,
Chris' was the most reasonable.  In addition, he was prompt in getting
out to look at the property and give an estimate, and personable and
professional in demeanor.  He did the job exactly when he said he would,
and the materials and workmanship were excellent.  Communicating with
him throughout the project was easy.
In summary, this was an outstanding experience with a professional and
knowledgeable contractor.  I would not hesitate to call on his services
again, or to recommend him to others.
"
Additional Photos
Additional Photos
Additional Photos
Recommended by81%of homeowners
Showing 1-10 of 19
Deck Staining questions, answered by experts

Staining or sealing a cedar deck or fence is highly recommended to extend its lifespan and protect it from the elements. While cedar is naturally resistant to mold and mildew, it is not impervious to damage from moisture, sun exposure, splintering, fading, and rot over time. Applying a protective finish creates a shield that preserves the wood's strength and appearance, potentially extending its life by five to 10 years.

When choosing a finish, it's helpful to understand the difference between a sealer and a stain. A sealer sits on top of the wood, whereas a combination stain and sealer soaks into the top layer. Because it penetrates the wood, a stain generally offers better protection against UV damage and rot and lasts significantly longer. For the best results that also preserve the wood's natural color, consider using a near-translucent stain.

To maintain protection, plan on reapplying the stain or sealer every two to three years, either as a DIY project or by hiring a professional.

A wood deck requires annual cleaning and regular inspections for loose or broken boards, nails, and screws. It should be refinished by applying a stain or sealer every two to three years to protect the wood from water damage, rot, mildew, and sun fading. The exact frequency can depend on the climate and the deck's exposure to sun and moisture. If your deck is painted, it will need repainting approximately every 10 years. Signs that your deck needs refinishing include faded, splintering, or warping boards.

Pricing depends on prep work, paint/stain choice, area size, scaffolding needs, and detailed trim inclusions like precision-balanced windowsills.

It’s often best to spray on deck sealer. Sprayers can apply sealant more quickly and evenly than rolling while still enabling you to reach tight spaces. When using a sprayer, always use a low-pressure setting at a close distance to ensure an even application. Avoid using sprayers on windy days.

Yes, you must thoroughly clean your deck before staining. If you don't, dirt, debris, grease, and mildew can get trapped between the wood and the new stain. This not only looks unsightly but also prevents the stain from penetrating the wood properly, reducing its ability to protect the deck from weather and UV rays. As a result, the stain won't last as long or look as good. Any existing mold or mildew left untreated can continue to grow beneath the new stain, potentially leading to wood rot and structural damage. Always wait at least 48 hours after cleaning for the wood to dry completely before applying stain.

The Patten, ME homeowners’ guide to deck staining services

From average costs to expert advice, get all the answers you need to get your job done.