Will drywall need to be replaced if it gets wet?

• <div><p>Yes, any parts of drywall that are wet or overly moist will need to be replaced. Drywall is intended to be dry (it’s in the name, after all.), as excess moisture can lead to mold and mildew and eventually corrode your home’s foundational building pieces. Do regular inspections in your home to make sure all your plumbing is intact and in good condition—this will go a long way toward preventing leaks.</p></div>

Get matched with top drywall pros in Acton, ME

Q: Can you plaster over broken plaster?

• <div><p>It&rsquo;s not a good idea to plaster over broken plaster (unless by broken you&rsquo;re referring to cracked, in which case that&rsquo;s perfectly fine). However, broken plaster can be a sign of a larger underlying issue like foundation damage or severe damage to the lath holding up the plaster, so it&rsquo;s worth investigating before you simply plaster on top of the damage. </p></div>

Q: Are you supposed to sand drywall mud?

• <div><p>Yes, as drywall mud is going to have some uneven spots and bumps after application. Such imperfections are going to be visible after everything dries and even after you paint the wall, so you want to remove them. Learning how to sand drywall, taking your time, and following <a href="https://www.angi.com/articles/how-eliminate-drywall-dust.htm">drywall sanding tips</a> can help you have the best results.</p></div>

Q: Why are studs 16 inches apart?

• <div><p>In framing, studs are placed at 16-inch intervals to coincide with the typical spacing of wall materials such as drywall or plywood. This spacing is called &quot;on-center&quot; and is necessary for maintaining structural stability and efficient use of materials. The 16-inch spacing also helps to distribute the weight evenly across the building's structure. For those looking to cut material costs and improve energy efficiency, 24-inch stud spacing can be employed through a method called &quot;advanced framing&quot;. This requires careful planning and adherence to local building codes to ensure structural integrity. </p></div>

Q: Does a fan help drywall mud dry faster?

• <div><p>Yes, a fan can help drywall mud dry faster by improving air circulation and reducing humidity in the room. Drywall mud dries through evaporation, so increasing airflow speeds up this process. However, you should position the fan to blow across the room rather than directly on the wet mud. This helps prevent drying too quickly, which can cause cracking. You should also use a dehumidifier if high humidity is an issue.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your drywall service project in Acton, ME?

Select your specific project to find the pro for you.

Verified Reviews for Drywall Service pros in Acton, ME

*The Angi rating for Drywall Service companies in Acton, ME is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Drywall Service needs.

*The HomeAdvisor rating for Drywall Service companies in Acton, ME is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Drywall Service needs.

Last update on December 01, 2025

Reviewed in December 2025
It can be difficult to find a contractor to complete the taping and mud work on a project where the drywall is already hung. This company came in and completed the work in record time to my satisfaction. The work is excellent, the priming done well. Would recommend this contractor to anyone with...
Titan Home Improvement
Request a quote
Reviewed in June 2025
We hired Gavin to finish our basement. He assured us he could do the job. He came by referral from someone who had used his services before. First 2 weeks were great until he had been paid a n full. Our fault for trusting him. He never finished everything he said he would and we are still not...
Gavin Liscombe Residential Construction
Request a quote
Reviewed in January 2025
Showed up long enough to collect up deposit of $13,000.+ Then never showed up again. Had to cancel inspections soley for him, had to push insulation and drywall out because he never shows up. Had to fire him over text since he didn't bother to show up for another week. He was told to...
CJF Plumbing and Heating
Request a quote
Reviewed in October 2022
I hired Chuck in February to hang sheet rock and coat a 1200 square ft house with a “level 3” smooth finish. He left a area in a back closet half finished and told me he would come back to complete it. (I had already paid him the last payment) . about 7 month later the back closet is still not...
Farrell Drywall and Paint
Request a quote
Reviewed in September 2022
Shawn is great and a pleasure to work with. He did a terrific job repairing several areas of damaged drywall in my home and then painting the walls where the damage was. I am very pleased with the quality of his work and found him to be personable, conscientious, honest, and committed to doing...
Shawn Marzerka
Request a quote
Reviewed in January 2021
Robert did an excellent job repairing a couple of small drywall problem areas in my home. We had some roof leaks in a bathroom and bedroom which Robert was able to quote and repair very quickly.
J&L Finishes, LLC
Request a quote
Reviewed in February 2020
Avellino construction came to my home to hang drywall and paint our master bedroom. Nick was prompt and professional in communication, job deliverance and pricing. Nick and his partner Gina were able to start and finish the job in under three day s including working all day on a Saturday!...
Avellino Construction
Request a quote
Reviewed in February 2020
JLC contacted me immediately and came out quickly to scope out the job and provide an estimate. Jim seems like an experienced and knowledgeable electrician. I hired him to do the work but was not happy with the workmanship in the end. Jim and his helper made an unnecessary hole in my drywall...
JLC Electric, LLC
Request a quote
Reviewed in August 2017
I was searching for someone to install drywall on one living room ceiling constructed with old split lathe and plaster (plaster already removed). I browsed Home Adviser for possibilities and ran across Dependable David. His outstanding reviews from numerous customers stood out among all others....
Dependable David Reliable Handyman Service
Request a quote

Drywall questions, answered by experts

It’s not a good idea to plaster over broken plaster (unless by broken you’re referring to cracked, in which case that’s perfectly fine). However, broken plaster can be a sign of a larger underlying issue like foundation damage or severe damage to the lath holding up the plaster, so it’s worth investigating before you simply plaster on top of the damage.

Yes, any parts of drywall that are wet or overly moist will need to be replaced. Drywall is intended to be dry (it’s in the name, after all.), as excess moisture can lead to mold and mildew and eventually corrode your home’s foundational building pieces. Do regular inspections in your home to make sure all your plumbing is intact and in good condition—this will go a long way toward preventing leaks.

Yes, as drywall mud is going to have some uneven spots and bumps after application. Such imperfections are going to be visible after everything dries and even after you paint the wall, so you want to remove them. Learning how to sand drywall, taking your time, and following drywall sanding tips can help you have the best results.

In framing, studs are placed at 16-inch intervals to coincide with the typical spacing of wall materials such as drywall or plywood. This spacing is called "on-center" and is necessary for maintaining structural stability and efficient use of materials. The 16-inch spacing also helps to distribute the weight evenly across the building's structure. For those looking to cut material costs and improve energy efficiency, 24-inch stud spacing can be employed through a method called "advanced framing". This requires careful planning and adherence to local building codes to ensure structural integrity.

Yes, a fan can help drywall mud dry faster by improving air circulation and reducing humidity in the room. Drywall mud dries through evaporation, so increasing airflow speeds up this process. However, you should position the fan to blow across the room rather than directly on the wet mud. This helps prevent drying too quickly, which can cause cracking. You should also use a dehumidifier if high humidity is an issue.

The Acton, ME homeowners’ guide to drywall services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Nick P. Cellucci
•
May 30, 2026May 30, 2026
How Much Does It Cost to Replace Plaster With Drywall? [2026 Data]
The cost to replace plaster with drywall can quickly add up. This guide will help you budget for this project and decide if it's worth the effort and cost.
Taylor Freitas
•
May 30, 2026May 30, 2026
How Much Does Drywall Installation Cost? [2026 Data]
Installing drywall is the most common way to finish your home’s interior. Use this drywall installation cost guide to see what your project is likely to cost.
Lyle Hendriks
•
May 30, 2026May 30, 2026
How Much Does It Cost to Texture Drywall? [2026 Data]
Drywall texture can create an attractive finish and add dimension to your home’s walls. This guide breaks down the factors that influence the cost to texture drywall.
Jamie Cattanach
•
May 5, 2026May 5, 2026
Can Drywall Mud Go Bad?
Can drywall mud go bad? It might not “expire,” but it can grow mold or dry out. Here’s what you need to know to extend its lifespan.
Taylor Freitas
•
May 3, 2026May 3, 2026
How Much Does a Sheet of Drywall Weigh?
If you’re planning to DIY your drywall installation, you’re probably wondering how much a sheet of drywall weighs. Let’s take a look.
Mariel Loveland
•
May 3, 2026May 3, 2026
Who Installs Drywall? Get the Right Pro for the Job
Drywall installation is a tricky job that typically requires a pro. This guide will tell you who installs drywall and the benefits of different contractors.