Get matched with top dishwasher installation pros in Monkton, MD

If your dishwasher isn’t draining, some common causes include a clogged drain filter, drain hose, or air gap. Also, if you have a garbage disposal, a clog in the disposal can back up your dishwasher since they share plumbing, as can a clog in your kitchen sink’s plumbing. A handy DIYer may be able to figure out how to unclog a dishwasher, but you may need to call in a plumber if you can’t locate and clear the clog yourself.

While the exact appearance of the filter will depend on your dishwasher brand, it often consists of a cylindrical or rectangular mesh or plastic component. The filter is located at the bottom of the dishwasher beneath the lower spray arm. It includes a combination of a coarse filter, which traps larger food particles, and a finer filter, which captures smaller debris. The filter assembly may be a single unit or a multi-part system that can be twisted or snapped out for cleaning.

When a dishwasher discharges its wastewater, it uses a pump to quickly move a lot of water. If anything in the drain line or the garbage disposal impedes the high volume of water, it will back up into the sink through the drain or the garbage disposal. Following regular dishwasher maintenance tips like clearing clogs, keeping them cleared, and occasionally running the disposal will eliminate the problem.

Dishwashers should be cleaned a minimum of once every 3 months, but really it should be done monthly. This is to prevent germ buildup and will help keep your machine running smoothly. Dishwasher maintenance isn’t too difficult, you’ll simply clean the filter, wipe down the spray arms with vinegar or rubbing alcohol, and run the cycle on empty. If there is any debris, you can remove it with a small metal pick. Do not use wood as the tip can break off inside the machine.