Water is sitting at the bottom of your dishwasher, likely because the filter is dirty with food debris or because the drain hose has a clog. If the water is still sticking around after following the steps above, it’s time to contact a local plumber.

To clean an old dishwasher without a filter, start by removing the bottom rack to access the drain area. Use a damp cloth or sponge to wipe down the interior, paying special attention to the corners and crevices where food particles and debris can build up. Pour a cup of white vinegar into a dishwasher-safe bowl and place it on the top rack, then run a hot water cycle to help break down grease and grime. After the cycle, sprinkle a cup of baking soda across the bottom of the dishwasher and run a short hot water cycle to deodorize and further clean the interior. 

Dishwashers should be cleaned a minimum of once every 3 months, but really it should be done monthly. This is to prevent germ buildup and will help keep your machine running smoothly. Dishwasher maintenance isn’t too difficult, you’ll simply clean the filter, wipe down the spray arms with vinegar or rubbing alcohol, and run the cycle on empty. If there is any debris, you can remove it with a small metal pick. Do not use wood as the tip can break off inside the machine.

It might be time to buy a new dishwasher for your kitchen if you consistently notice a significant amount of water left over after a cycle, indicating potential drainage issues that are becoming persistent or costly to fix. Visible rust, especially on the interior tub or racks, suggests internal corrosion that will likely worsen over time and can compromise cleaning performance. Additionally, if your dishes are coming out excessively hot after the drying cycle, it could point to a malfunctioning heating element or thermostat, which can be an energy inefficiency and a potential safety concern, making replacement a feasible choice.