Best dishwasher installation pros near Capitol Heights, MD

The answer is a resounding yes, as dishwashers save significant water and energy compared to washing dishes by hand. The difference is so drastic in fact that those who use energy-efficient dishwashers can expect savings of over $450 per year. This is because dishwashers use less water, they wash at a higher temperature than a hand rinse, and you don’t need to rinse them after washing. New dishwashers use around 4 gallons per load, whereas washing by hand can use up to 2 gallons per minute.

Your dishwasher drains through a hose that attaches to the plumbing below your sink or snakes out the back of your machine. In most cases, you can access one side of the hose from below your sink, as it usually ties into the same drainline that your sink uses. Otherwise, you may need to pull the dishwasher out of the counter to access it.

Yes, a dishwasher needs an air gap to prevent backflow. Additionally, in many locations, air gaps or another measure to prevent backflow are required for building code compliance. There are alternatives to an air gap, like a Studor vent or a loop and trap design, but an air gap is the simplest and most popular solution.  

Installing a dishwasher should take one to four hours, depending on the complexity of the installation and whether you DIY or hire a pro. Even if you're particularly handy, installing a dishwasher on your own will likely take longer — at least two hours. On the other hand, a professional can likely install a dishwasher in about an hour. Installation time will take longer if you have to remove an existing dishwasher, reroute plumbing, or repair damaged flooring underneath the appliance.