Get matched with top drain cleaners in Arbutus, MD

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

Pouring drain cleaner down a vent pipe isn’t recommended. First of all, unlike a clog in a sink or bath caused by such material as soap scum build-up, toothpaste, and hair, clogs in a vent pipe are likely the result of debris from trees or even an animal stuck in the pipe. Drain cleaners won’t be able to eat through this kind of material. The cleaner will only become clogged in the vent with the debris, causing even more problems.

Main sewer lines can clog for several reasons. For example, if you regularly dump oil or grease down your drain, it could eventually block your line. Sometimes, tree roots can penetrate and grow inside old sewer pipes, creating a major blockage. Flushing bulky items (like paper towels, diapers, or baby wipes) can also clog your plumbing system.

Start by unscrewing the overflow valve, which is located on the wall of your tub between the floor drain and the tub spout. Gently insert a plumbing snake down into the pipe, move it back and forth, and pull it out. Remove any hair, debris, and soap scum that comes out with it. Repeat the process until the snake comes out clean, and then reinstall the cap on your overflow valve.