*The Angi rating for Plumbing Handyman Service companies in Randolph, MA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Plumbing Handyman Service needs.
*The HomeAdvisor rating for Plumbing Handyman Service companies in Randolph, MA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Plumbing Handyman Service needs.
Last update on May 07, 2025
With offices in Middleton, Stow & Lakeville, Mass. and an additional service depot in Plymouth, Mass., H20 Care, Inc. performs water testing & analysis, specifies and installs equipment with our Master Plumbers headed staff. We also have a full service staff to maintain your water filtration and softening systems to optimize their useful life and performance. We can correct any water problem that you are experiencing, including hard water, high levels of iron or manganese, bad odors & taste, and health threats such as radon, arsenic, PFAS or others. We GUARANTEE our work! Our service staff is available and on-call 24/7 and our experience within our industry is unmatched. See our published articles in Water Technology Magazines on regional water quality issues on our website's publications section at www.h2ocare.com. You may also email us at service@h2ocare.com.
"Good, no complaint"
Zach H on April 2023
With offices in Middleton, Stow & Lakeville, Mass. and an additional service depot in Plymouth, Mass., H20 Care, Inc. performs water testing & analysis, specifies and installs equipment with our Master Plumbers headed staff. We also have a full service staff to maintain your water filtration and softening systems to optimize their useful life and performance. We can correct any water problem that you are experiencing, including hard water, high levels of iron or manganese, bad odors & taste, and health threats such as radon, arsenic, PFAS or others. We GUARANTEE our work! Our service staff is available and on-call 24/7 and our experience within our industry is unmatched. See our published articles in Water Technology Magazines on regional water quality issues on our website's publications section at www.h2ocare.com. You may also email us at service@h2ocare.com.
"Good, no complaint"
Zach H on April 2023
Our priority is your comfort at home. Why Choose Us? - 5-star Rated Company: We are a 5-star rated company with more than 400 satisfied clients. - Customer Success: We focus on long-term relationships. - Specialist: Expert knowledge and proven skills. - Licensed and Insured: Our services are fully insured, providing you with peace of mind. - Quality in Everything we do: Best service with the best products. - Double-year warranty on labor. - Emergency Service: We're ON 24/7 to ensure your well-being.
"They were on time worked fast and efficient"
Patrick O on April 2025
Our priority is your comfort at home. Why Choose Us? - 5-star Rated Company: We are a 5-star rated company with more than 400 satisfied clients. - Customer Success: We focus on long-term relationships. - Specialist: Expert knowledge and proven skills. - Licensed and Insured: Our services are fully insured, providing you with peace of mind. - Quality in Everything we do: Best service with the best products. - Double-year warranty on labor. - Emergency Service: We're ON 24/7 to ensure your well-being.
"They were on time worked fast and efficient"
Patrick O on April 2025
*FREE CAMERA INSPECTION* with any sewer cleaning. We provide on-demand high quality commercial and residential drain cleaning services. We take pride in our high quality work and cleanliness, we also take even greater pride in our low prices. We have only experienced techs with a minimum of 6 plus years in drain cleaning, we provide camera work, small drains such as sinks and tubs all the way up to main sewer lines. We also provide excavation services if any drains need to be replaced.
"They did a great job. They were able to use a small pump to pump the waste water out before replacing the broken pump. The other company wanted us to pay for a pump truck costing $600 before giving the estimate."
Mei W on November 2024
*FREE CAMERA INSPECTION* with any sewer cleaning. We provide on-demand high quality commercial and residential drain cleaning services. We take pride in our high quality work and cleanliness, we also take even greater pride in our low prices. We have only experienced techs with a minimum of 6 plus years in drain cleaning, we provide camera work, small drains such as sinks and tubs all the way up to main sewer lines. We also provide excavation services if any drains need to be replaced.
"They did a great job. They were able to use a small pump to pump the waste water out before replacing the broken pump. The other company wanted us to pay for a pump truck costing $600 before giving the estimate."
Mei W on November 2024
Live Your Most Comfortable Life with a Company You Trust. We offer Same Day Service and Next Day Installation! Sila has been the center of delighting homeowners since 1989, with our team of engineers, certified technicians, and system designers that are proud to deliver the highest level of expertise in the HVAC industry. Whether it’s a repair, replacement, installation, or service, we have an unwavering commitment to keeping you and your family comfortable and safe — season after season. We guarantee satisfaction and are proud to have earned over 7,000 “A” ratings on Angie’s List and its prestigious Super Service Award!
"Topic is a home water supply Shallow Well which operates with a shallow well jet pump + pressure tank installed in the basement. I had been collecting parts over the summer, as I knew the original to house jet pump would go out soon some day and with covid parts are hard to get quick, so started collecting ahead of time. Glad I did as the pump started leaking, from the housing. Replacement needed. Not an emergency but time to get it replaced. Was a ticking clock as it also looked like the pump was twisting putting stress on piping as original owner did not mount it and other fittings had large amounts of corrosion on them. I supplied these parts for the job: new 1hp jet pump, 44 Gal. pressure tank with T package, water filter housing, brass fittings, brass check valve, brass ball valves, 1" copper pipe and some copper fitting, and 2x10 pressure treated board to mount the pump/board to the floor with concrete anchors. Called up Sila on 10/14, master plumber Dave was available on 10/16 to come quote the job of installing what I supplied and misc. parts still needed. Talked with me and received my requests for specific design wants and he supplied his opinions & additional ideas and other options like wall mounting of water filter, sensor shutoff option and different water filter all together and we worked out the plan, did not do the different filter or sensor though. Talked about brass pipe and fittings at the pump up to the pressure tank and we agreed what I had purchased was good and would last a lifetime, vs copper all the way which would still last a long time. Quoted $2800 with water filter bypassing and $2600 without the water filter bypassing. Job was scheduled for 10/22. Quote was high level line item as listed here. Came a bit late on 10/14, due to an emergency call, no big deal Dave called to let me know. Was on time for installation on 10/22, 7:30am. Two workers on Job (Dave + 1, sorry I’m horrible with names +1 was an electrician and was helping Dave) Job took ~ 8 hours to finish. What was not able to be completed: Was not able to replace old original check valve. Well started to suck air when old was started to be removed, confirming there is no foot valve on the line or a broken one, so old check valve was kept. Concern was not being able to recover from air going down the well pipe causing priming issues. At this point the job would require a well expert and was not able to be replaced by Sila. What part of job was mis-understood: Mounting of jet pump to board/floor. Ended up missing the concrete anchors to start and installing after the fact with a different method. Made it more difficult to mount the pump and did scratch the rust proof paint. But it got done. Nice and sturdy. What was complicated on the job: Something that should have not been an issue at all went wrong. I had purchased 1” brass unions. There were two unions installed. One was found to be causing leaks during the initial job installation. This caused extra rework during the initial job. After job completion and area dried with a fan, it was found that both unions were leaking. The original one that had issues in the initial job and the 2nd one. One is pre pump and one is post pump. Called Sila office on 10/23 and told them what was happening, Dave’s earliest availability to come back was was 10/26. He was on time on 10/26. Dave stated that 1 union was giving trouble and replaced it with one spare that I had also purchased. When looking at the 2nd union again he was not able to get it to seal and he made the call and changed the design to direct copper connection and no union, I did not object as at this point just wanted the job done. No More leaks on that location, but also no ability to easily break the connection for future maintenance. When left no leaks. However, after using water for a while the 1st union started leaking again. Texted Dave direct with a picture and said he could return on 10/28 and I requested him to bring a union from his supply. Arrived when he could with ~ 1hr notice and replaced the union with one of his. When looking closer at the issue unions that I had purchased it was found they were cracking. Summary: I’m a novice in pluming, reason for calling Sila. I wish Dave would have noticed the poor part / crack issue and replaced unions from his stock on day 1. I was trying to save time by collecting parts over time and ended up causing issues. Dave knew he was working with brass and seems like he did not have backup stock on site incase of issues. Wish he did as I’d have two unions… and he would not have had to come back twice to repair the leaks. The call was made to not use the brass ball valves I purchased so it was clear that my parts were recommended to use but not absolute. Overall Dave and team did a great job, it’s clean, organized, valves and drain spickets installed nice and logically, filter is at good height, job completed like I asked and planned with Dave, except for the above jet pump mounting, union issue and check valve replacement discussion above here. Dave and team was professional and focused to get the job done. Thanks Dave for your hard work. Reason for Rating: I am giving this job an A rating based on the end result, Sila stood by the workmanship and resolved the issues that arose. That is a sign of a great company. If I would not have supplied the couplers that issue would not have happened ultimately and the check valve & well priming issue was just out of reach and would have required a well specialist to complete. The pump mounting was probably just lost in the large amount of details we had discussed, again it is mounted sturdy."
steven m on November 2020
Live Your Most Comfortable Life with a Company You Trust. We offer Same Day Service and Next Day Installation! Sila has been the center of delighting homeowners since 1989, with our team of engineers, certified technicians, and system designers that are proud to deliver the highest level of expertise in the HVAC industry. Whether it’s a repair, replacement, installation, or service, we have an unwavering commitment to keeping you and your family comfortable and safe — season after season. We guarantee satisfaction and are proud to have earned over 7,000 “A” ratings on Angie’s List and its prestigious Super Service Award!
"Topic is a home water supply Shallow Well which operates with a shallow well jet pump + pressure tank installed in the basement. I had been collecting parts over the summer, as I knew the original to house jet pump would go out soon some day and with covid parts are hard to get quick, so started collecting ahead of time. Glad I did as the pump started leaking, from the housing. Replacement needed. Not an emergency but time to get it replaced. Was a ticking clock as it also looked like the pump was twisting putting stress on piping as original owner did not mount it and other fittings had large amounts of corrosion on them. I supplied these parts for the job: new 1hp jet pump, 44 Gal. pressure tank with T package, water filter housing, brass fittings, brass check valve, brass ball valves, 1" copper pipe and some copper fitting, and 2x10 pressure treated board to mount the pump/board to the floor with concrete anchors. Called up Sila on 10/14, master plumber Dave was available on 10/16 to come quote the job of installing what I supplied and misc. parts still needed. Talked with me and received my requests for specific design wants and he supplied his opinions & additional ideas and other options like wall mounting of water filter, sensor shutoff option and different water filter all together and we worked out the plan, did not do the different filter or sensor though. Talked about brass pipe and fittings at the pump up to the pressure tank and we agreed what I had purchased was good and would last a lifetime, vs copper all the way which would still last a long time. Quoted $2800 with water filter bypassing and $2600 without the water filter bypassing. Job was scheduled for 10/22. Quote was high level line item as listed here. Came a bit late on 10/14, due to an emergency call, no big deal Dave called to let me know. Was on time for installation on 10/22, 7:30am. Two workers on Job (Dave + 1, sorry I’m horrible with names +1 was an electrician and was helping Dave) Job took ~ 8 hours to finish. What was not able to be completed: Was not able to replace old original check valve. Well started to suck air when old was started to be removed, confirming there is no foot valve on the line or a broken one, so old check valve was kept. Concern was not being able to recover from air going down the well pipe causing priming issues. At this point the job would require a well expert and was not able to be replaced by Sila. What part of job was mis-understood: Mounting of jet pump to board/floor. Ended up missing the concrete anchors to start and installing after the fact with a different method. Made it more difficult to mount the pump and did scratch the rust proof paint. But it got done. Nice and sturdy. What was complicated on the job: Something that should have not been an issue at all went wrong. I had purchased 1” brass unions. There were two unions installed. One was found to be causing leaks during the initial job installation. This caused extra rework during the initial job. After job completion and area dried with a fan, it was found that both unions were leaking. The original one that had issues in the initial job and the 2nd one. One is pre pump and one is post pump. Called Sila office on 10/23 and told them what was happening, Dave’s earliest availability to come back was was 10/26. He was on time on 10/26. Dave stated that 1 union was giving trouble and replaced it with one spare that I had also purchased. When looking at the 2nd union again he was not able to get it to seal and he made the call and changed the design to direct copper connection and no union, I did not object as at this point just wanted the job done. No More leaks on that location, but also no ability to easily break the connection for future maintenance. When left no leaks. However, after using water for a while the 1st union started leaking again. Texted Dave direct with a picture and said he could return on 10/28 and I requested him to bring a union from his supply. Arrived when he could with ~ 1hr notice and replaced the union with one of his. When looking closer at the issue unions that I had purchased it was found they were cracking. Summary: I’m a novice in pluming, reason for calling Sila. I wish Dave would have noticed the poor part / crack issue and replaced unions from his stock on day 1. I was trying to save time by collecting parts over time and ended up causing issues. Dave knew he was working with brass and seems like he did not have backup stock on site incase of issues. Wish he did as I’d have two unions… and he would not have had to come back twice to repair the leaks. The call was made to not use the brass ball valves I purchased so it was clear that my parts were recommended to use but not absolute. Overall Dave and team did a great job, it’s clean, organized, valves and drain spickets installed nice and logically, filter is at good height, job completed like I asked and planned with Dave, except for the above jet pump mounting, union issue and check valve replacement discussion above here. Dave and team was professional and focused to get the job done. Thanks Dave for your hard work. Reason for Rating: I am giving this job an A rating based on the end result, Sila stood by the workmanship and resolved the issues that arose. That is a sign of a great company. If I would not have supplied the couplers that issue would not have happened ultimately and the check valve & well priming issue was just out of reach and would have required a well specialist to complete. The pump mounting was probably just lost in the large amount of details we had discussed, again it is mounted sturdy."
steven m on November 2020
Our mission is to be a plumbing contractor that brings back the personal touch with our customers. We will build a relationship that will last a lifetime after you see our quality work. As a locally owned and operated business we feel invested in our clients and constantly strive for customer satisfaction. We won't leave until the job is done right! Call or click to schedule an estimate today!
"Dave Colon has completed several plumbing repairs recently. He is a professional plumber who is driven to do an excellent job every time.He doesn’t complete a job unless he and the customer are pleased with the work.He is the best plumber I have ever hired. I will recommend him to everyone I know. Pat Hart"
Patrick H on December 2024
Our mission is to be a plumbing contractor that brings back the personal touch with our customers. We will build a relationship that will last a lifetime after you see our quality work. As a locally owned and operated business we feel invested in our clients and constantly strive for customer satisfaction. We won't leave until the job is done right! Call or click to schedule an estimate today!
"Dave Colon has completed several plumbing repairs recently. He is a professional plumber who is driven to do an excellent job every time.He doesn’t complete a job unless he and the customer are pleased with the work.He is the best plumber I have ever hired. I will recommend him to everyone I know. Pat Hart"
Patrick H on December 2024
Additional service area - Cohasset, Fitchburg, Worcester, portions of Chelsea-Saugus, Chelmsford Counties. South Shore & Cape Cod and All of Rhode Island. Family owned and operated since 1984. Additional email - info@pioneerbasement.com. Additional phone - (800) 439-0788. Additional DBA - Pioneer Basement Waterproofing Inc.
"Went well. pumps replaced"
Esther H on August 2022
Additional service area - Cohasset, Fitchburg, Worcester, portions of Chelsea-Saugus, Chelmsford Counties. South Shore & Cape Cod and All of Rhode Island. Family owned and operated since 1984. Additional email - info@pioneerbasement.com. Additional phone - (800) 439-0788. Additional DBA - Pioneer Basement Waterproofing Inc.
"Went well. pumps replaced"
Esther H on August 2022
We have the experience and dedication to bring your dreams to reality! We guarantee your satisfaction, and we won’t leave until the job is done right. Call or click to schedule a free estimate today!
"Very professional, on time, great work and reasonable pricing. I highly recommend Buresh Plumbing!"
Anthony B on July 2021
We have the experience and dedication to bring your dreams to reality! We guarantee your satisfaction, and we won’t leave until the job is done right. Call or click to schedule a free estimate today!
"Very professional, on time, great work and reasonable pricing. I highly recommend Buresh Plumbing!"
Anthony B on July 2021
We are a small plumbing and heating business out of Weymouth MA.we do all plumbing heating and gas installation. We do anything from fixing a leaking faucet to bathroom and kitchen remodels. We do new construction, water heater replacement and installation, boiler repairs and replacements, drain cleaning, leak repair, and much more.
"It went very well. And he was very professional"
Inara A on June 2024
We are a small plumbing and heating business out of Weymouth MA.we do all plumbing heating and gas installation. We do anything from fixing a leaking faucet to bathroom and kitchen remodels. We do new construction, water heater replacement and installation, boiler repairs and replacements, drain cleaning, leak repair, and much more.
"It went very well. And he was very professional"
Inara A on June 2024
Experiencing issues with your heating, air conditioning, plumbing, or electrical systems? Cotti-Johnson is your reliable one-stop shop for all home comfort needs. From simple fixes to large-scale projects, our professional team handles everything with honesty and expertise. We offer 24/7 emergency services and specialized design services for landscape and indoor lighting. Trust us for top-notch, efficient, and transparent service. Visit our website at callcotti.com or call us at (833) 826-8844 to see how we can improve your home's comfort and efficiency.
"The electrician, Mr. Jason Thompson, did an excellent job."
Armen S on April 2025
Experiencing issues with your heating, air conditioning, plumbing, or electrical systems? Cotti-Johnson is your reliable one-stop shop for all home comfort needs. From simple fixes to large-scale projects, our professional team handles everything with honesty and expertise. We offer 24/7 emergency services and specialized design services for landscape and indoor lighting. Trust us for top-notch, efficient, and transparent service. Visit our website at callcotti.com or call us at (833) 826-8844 to see how we can improve your home's comfort and efficiency.
"The electrician, Mr. Jason Thompson, did an excellent job."
Armen S on April 2025
We at A.J's Plumbing & HVAC Services have over 25+ years of experience. We are your one stop shop for all your plumbing and hvac needs. We believe and quality and affordability. Give us a call today for your Estimate. We only charge $175 for the first hour and $125 after that. We look forward to working with you.
"Andrew and his crew have done countless jobs for me over past 20 years. He has worked on my home and for many of my customers. Fair price , good quality and great communication!"
Dan C on January 2025
We at A.J's Plumbing & HVAC Services have over 25+ years of experience. We are your one stop shop for all your plumbing and hvac needs. We believe and quality and affordability. Give us a call today for your Estimate. We only charge $175 for the first hour and $125 after that. We look forward to working with you.
"Andrew and his crew have done countless jobs for me over past 20 years. He has worked on my home and for many of my customers. Fair price , good quality and great communication!"
Dan C on January 2025
The average cost to hire a handyman ranges from about $40 to $140 per hour. Average project cost ranges between $180 and $700, but the cost per hour and per project depends heavily on the type, size, and complexity of the project. The pro’s experience level and your location also factor into how much a handyman charges per hour or per project. You can also expect to pay higher rates or additional fees for emergency services, or around periods of high customer demand, like holidays.
Yes, most states require plumbers to be licensed, and for good reason. Hiring an unlicensed plumber could lead to poor quality work, costly future expenses, and potential code violations.
As you browse our pro listings, take note of the “Angi Approved” badge. Angi Approved businesses meet our standards for certification which include:
The owner, principal, or relevant manager passed a criminal background check
Required to have applicable state and local licenses
Maintain an average star rating of 3.0 or better on our network, if they have at least one review
Paying to advertise their services
Meeting any other eligibility criteria required by Angi
Keep in mind licensing is different from certifications. A license is a legal requirement to operate a business, while certifications are voluntary.
There are several questions or things to know before hiring a handyman to do any work in your home.
What kind of work do they do?
Do they have proper licensing?
Do they charge for estimates?
Is the estimate for both labor and materials?
Do they provide references?
Do you provide a guarantee?
When can you start and finish the job?
Do you have any before and after photos of your work?
How long have you been doing this kind of work?
Do you clean up and dispose of waste when the job is finished?
Yes, you should hire a handyman who’s licensed, certified, and insured, if possible. States have different requirements for handyman licensing, registration, and certifications. If licensing is required in your area, you may pay more for a licensed handyman with experience than one who is not licensed or certified, but you’re likely to get a better end result for your project. Be sure to check our state licensing tool to review the local handymen guidelines.
The average cost to hire a plumber is around $100 an hour but can vary between $45 and $200 an hour depending on the plumber’s experience and the repair that you need. It’s also important to note that these prices can go up on holidays, and emergency plumber rates average $150 per hour, in addition to a flat-rate trip fee of $100 to $350.