Top-rated floor polishers.

Get matched with top floor polishers in LaPlace, LA

Enter your zip and get matched with up to 5 pros

Need a pro for your floor polishing project in LaPlace, LA?

Select your specific project to find the pro for you.

Find Floor polishers in LaPlace

Avatar for Clean Pro Cleaning & Restoration
Clean Pro Cleaning & Restoration
4.8(
95
)
Clean & Polish Flooring - For Business

Serving LaPlace, LA and surrounding areas

In business since 1997

Free estimates

Emergency services offered

"It was a big job, but Keith and Ann arrived early at 8:45am and completed the project at 3:45pm. They covered all areas surrounding each vent with drop cloths and worked throughout the house. The air duct cleaning unit is self contained, but they made sure to vacuum up any residual debris from removing the vents. They also washed and re-installed all vents. Keith also did a small repair on an air duct in my attic that was letting in warm air at no charge! This is the 2nd time I have used Clean Pro and they were just as courteous, prompt, and organized as ever. I would definitely recommend their services! They also provide a number of other services you can look into on their website. I plan to have our fabric sectional sofa and dining room chairs stain sealed in the future. They also clean drapes and carpet. A+ for Clean Pro!"
Additional Photos
Additional Photos
Recommended by95%of homeowners
Avatar for Holywood LLC.
Holywood LLC.
5.0(
9
)
Clean & Polish Flooring - For Business

Serving LaPlace, LA and surrounding areas

In business since 2021

Free estimates

Credit card accepted

"This company is great! Prompt, courteous, helpful. They were hired to replace the flooring in our entire house and were in and out in 3 ( three) days, cleaned up after themselves, moved and replaced all furniture. I can’t say enough about them!"
Refinishing
Refinishing
Additional Photos
Additional Photos
Additional Photos

+69

Recommended by100%of homeowners
...
Showing 1-10 of 67
Floor Polishers questions, answered by experts

Before installing shoe molding, evaluate redoing or refinishing any floors and painting your walls or baseboard before putting on your shoe molding. If you don’t already have baseboard trim, you should install that before adding shoe molding. Shoe molding is the final touch. Additionally, a carpenter or other professional that’s installing shoe molding might also give you a deal on installing crown molding and replacing other trim if you get them done at the same time.

To properly maintain and care for hardwood floors without damaging the finish, establish a regular cleaning routine. Sweep with a broom or microfiber dust mop daily, or vacuum weekly, to remove dirt and debris that can scratch the surface; be sure to clean in tight corners and under furniture. For a deeper clean, use a damp mop with a cleaner specifically designed for hardwood floors, but avoid using harsh chemicals or excessive water, as this can damage the wood. You can further protect your floors by placing mats at entryways to catch dirt and moisture and putting felt pads under furniture legs to prevent scratches. For long-term care, refinish the floors as needed to keep them looking their best.

While every professional home cleaner will have their own preference, most will use a commercial floor cleaner specifically manufactured for laminate floors. They will also use a vacuum or microfiber cloth to remove loose grit before breaking out the mop. Some cleaners will also make a final pass with a dry and clean cloth to dry your laminate floors for a smooth shine.

Yes, but with caution. A floor grinder is intended to level and polish concrete, so it is a very powerful tool. To remove paint, the floor grinder should be set to 35 square feet per minute or less to minimize the pressure without the use of pocket weights. You might need to go over the surface two times to get any paint that has sunk into the concrete’s pores.

Before starting on a full refinishing project, determine if your floors need to be completely sanded down to the bare wood or if the damage is shallow and mostly cosmetic. Deep scratches and gouges will require you to rough sand using a drum sander or belt sander, but small surface scratches or floors that have only lost their luster don’t need a complete overhaul. Instead, you can skip the rough sanding step and sand-screen the old finish with a buffer, removing only the top layer of polyurethane.

The LaPlace, LA homeowners’ guide to floor polishing services

From average costs to expert advice, get all the answers you need to get your job done.